chanelink logo
CHANELINK
Tiếng Việt

During power on and reset, the X axis stopped after touching the limit switch, while the Y axis was still running slowly at the origin.

Danh mục:
Ruida
Thẻ:
514
1
Xem bản dịch
2022-12-30

During power on and reset, the X axis stopped after touching the limit switch, while the Y axis was still running slowly at the origin.
C

    • Marshall

      2023-01-03
      ① The polarity of the Y axis is reversed. Reset the polarity;
② The limit switch is broken and needs to be repaired.
        Xem bản dịch
        Trả lời
      Đề xuất liên quan
      Thu thập
      Báo cáo