chanelink logo
CHANELINK
Tiếng Việt

HGTECH Laser's New Product Debuts at the 2025 Munich Shanghai Light Expo

430
2025-03-07 16:26:05
Xem bản dịch

New Product for Wafer Testing Probe Card Manufacturing Equipment Project

 


This project adopts vision guided laser precision cutting to separate the probe from the crystal disk, and then generate a product mapping image for use in the next process. When picking up the probe, multi-point reference surface fitting technology is used to achieve non-contact probe suction and avoid force deformation. After picking up the probe, posture correction technology is used to ensure that the probe is implanted into the fixture. Probe crystal disk size 8 ", thickness>20 μ m, cutting accuracy<10 μ m, heat affected zone<30 μ m, correction accuracy<2 μ m, implantation accuracy<10 μ m, welding accuracy XY<3 μ m, Z<8μm， Weld the maximum plate of 12 inches.

application area 
Electronic/Electrical/Semiconductor


New intelligent equipment for comprehensive printing and marking


The comprehensive printing and marking intelligent equipment is particularly suitable for the field of shipbuilding. Based on the assembly line method, it uses UV coding technology, combined with full format automatic 2D visual edge finding technology, under the control of MES system, and combined with dedicated control and programming conversion software, to achieve efficient printing of various display elements on steel plates in shipbuilding. The maximum printing width of the equipment is 5.5m, which can meet the printing needs of all steel plates in the shipbuilding process; The printing speed is fast, with a speed of up to 25m/min when used as an offline device. A steel plate with a size of 5.5 * 22m can complete all printing work in 53 seconds, which is more than 90% slower than traditional methods.

application area 
Tool manufacturing/engineering machinery

Đề xuất liên quan

  • Research has found that inorganic perovskite materials are easy to prepare and process, making them suitable for manufacturing lasers

    According to research from Busan National University, inorganic perovskite materials are easy to prepare and process, making them suitable for manufacturing lasers.The perovskite of interest is CsPbBr3, which must form "nanosheets" within the specific structure invented by the Busan team to obtain sufficient laser gain.It is not that the laser has been achieved, as the research project aims to cha...

    2024-01-04
    Xem bản dịch

  • Xi'an Institute of Optics and Fine Mechanics has made new progress in the research of intelligent optical microscopy imaging

    Recently, the State Key Laboratory of Transient Optics and Photonics Technology of Xi'an Institute of Optics and Fine Mechanics has made new progress in the research of intelligent optical microscopic imaging, and the research results were published online in the international high-level academic journal Opto Electronic Advances (IF: 15.3). The first author of the paper is Tian Xuan, a 2024 doctor...

    2024-09-09
    Xem bản dịch

  • An innovative technology that can make light "bend"

    A research team from the University of Glasgow in the UK drew inspiration from the phenomenon of clouds scattering sunlight and developed an innovative technology that can effectively guide or even "bend" light. This technology is expected to achieve significant breakthroughs in fields such as medical imaging, cooling systems, and even nuclear reactors. The relevant research results were published...

    2024-11-11
    Xem bản dịch

  • Instrument Systems will showcase advanced optical measurement solutions for display technology in San Jose next week

    In the 2024 Showweek Germany Pavilion, Instrument Systems will showcase the LumiTop series, a series of imaging colorimeters designed specifically for high-precision and fast 2D measurements, to meet specific needs in AR/VR, automotive, and continuous production environments.The LumiTop 5300 AR/VR is a high-resolution camera developed specifically for evaluating near eye displays, which will recei...

    2024-05-09
    Xem bản dịch

  • German team develops and promotes laser technology for formable hybrid components

    Scientists from the Hanover Laser Center (LZH) in Germany are studying two laser based processes for producing load adapted hybrid solid components.From a transaction perspective, mixing semi-finished products can help save materials and production costs, but if the components that need to be replaced are made of expensive materials, these materials need to meet high requirements in future use, su...

    2023-08-16
    Xem bản dịch