chanelink logo
CHANELINK
Tiếng Việt

SEMA 2023: Huali's Easy Level Floating Free Laser Fuel Level Transmitter

844
2023-11-03 14:51:33
Xem bản dịch

Winning the SEMA Best Engineering New Product Award is not an easy task. Therefore, it said a lot about Huali's new non floating fuel transmitter bringing hardware home. The Easy Level fuel level sender is a brand new design that does not rely on traditional float arm settings, but uses a frikken laser beam to measure the fuel level in the tank.

More precisely, Easy Level uses LiDAR technology to measure the distance between the fuel surface and the sensor unit, and then converts this distance measurement value into a signal that can be read by the fuel level gauge. It can be used with any aftermarket instrument, "said Steve Sparkman of Holley. It is not suitable for OEM instruments, but all aftermarket instruments - Classic Instruments, Dakota Digital, etc. - can be easily connected.

This sensor is suitable for tanks with depths ranging from 4 inches to 39 inches and can be set up outside the vehicle. By using the buttons on the device, you can set the empty and full positions before installation, and then set the same position on the instrument panel after installation. You can even adjust the damping rate of the reading through the DIP switch on the device to manage instrument bounce caused by fuel shaking.

This device is very compact and easy to install. It looks like a hockey ball, "Sparkman said. It has a laser that can shoot down and tell you where the fuel is. It's so simple. Installation is a simple task, including installing hardware and gaskets, as well as installing flange templates. The small bolt circle diameter of 2-1/8 inches hardly occupies space on the fuel tank, and the 12 volt PWM output signal makes sensor wiring easy.

Source: Laser Network

Đề xuất liên quan

  • New types of lenses in optics: Researchers develop hybrid achromatic lenses with high focusing efficiency

    Researchers at the University of Illinois at Urbana Champaign have developed compact visible wavelength achromatic mirrors using 3D printing and porous silicon, which are crucial for miniaturization and lightweight optical devices. These high-performance hybrid micro optical devices can achieve high focusing efficiency while minimizing volume and thickness. In addition, these microlenses c...

    2023-12-11
    Xem bản dịch

  • Danish scientists have created solar cells based on selenium using a new laser annealing technique

    A team of scientists at the Technical University of Denmark has created a selene-based solar cell by replacing thermal annealing with a new laser annealing strategy."In our work, we investigated the potential of this laser annealing strategy specifically for selenium thin film solar cells, and we report a new world record for fill factor, a new world record for ideal factor, and the most advanced ...

    2023-09-06
    Xem bản dịch

  • Han's Laser wins multiple lithium battery projects

    Recently, relevant information shows that Shenzhen Han's Lithium Battery Intelligent Equipment Co., Ltd. (referred to as Han's Lithium Battery) has won the bid for the solid-state battery pilot line testing section process equipment project and solid-state battery pilot line assembly section process equipment project of Dongfeng Hongtai Holdings Group Co., Ltd. The winning bid amounts are 9.3847 m...

    2024-09-28
    Xem bản dịch

  • New nanophotonic circuits demonstrate the potential of quantum networks

    The Purdue University team in the United States has captured alkali metal atoms (cesium) in integrated photonic circuits, which can serve as transistors for photons (the smallest energy unit of light). These captured atoms demonstrate for the first time the potential of cold atom integrated nanophotonic circuits to construct quantum networks. The research results were published in the latest issue...

    2024-08-14
    Xem bản dịch

  • A new approach to 3D printing has been published in a Nature journal

    In the last century, the improvement of mechanical properties of structural metals was mainly achieved through the creation of increasingly complex chemical compositions. The complexity of this ingredient increases costs, creates supply fragility, and makes recycling more complex.As a relatively new metal processing technology, metal 3D printing provides the possibility to re-examine and simplify ...

    2024-11-29
    Xem bản dịch