Lightburn v1.4.03 on Win 10 machine is not working. Offset outward actually offsets both directions. Offset inwards does nothing. Offset both works as intended.

Christian

2023-10-26

811

1

0

Hi, I am new here,I use ubuntu and my notebook is a Acer Aspire 5.The problem is not show layers. I can’t select colors.

Nugent

2023-10-26

743

1

0

Recently the laser quietly stopped firing in the middle of a simple job. It was just cutting a straight line at about 20mA.The rest of the machine still works normally. No error messages. The power supply’s fan is running.What I’ve tried:Controller Pulse button = nothing happens. No movement on ammeter, and laser doesn’t fire.Test...

Terrelle

2023-10-25

878

1

0

HiWhat is the reason that the laser cuts great in the Y axis but worse in the X axis?

Clarence

2023-10-25

848

1

0

cutting 1/2” foam sheet into 1” circles. Start point and end point don’t quite meet up. Can I make laser go slightly past the start point so it cuts complete circle and cut pieces will cleanly fall out of scrap sheet.

Gilbert

2023-10-25

876

1

0

Hi all…I found objects that I like but it’s very intensive for laser.Does LightBurn have option to simplify objects? Check image so you can see what I mean.

John Trant

2023-10-24

760

1

0

So, as I progress down the road to the completion of the Russ Sadler upgrade, I’ve bumped into a few challenges* along the way. When I installed the adjustable head bracket (from Cloudray) I had to move it about 8mm forward so that it wouldn’t slam into the homing sensor (which was on the left side of the X gantry). I have moved that se...

Jen

2023-10-24

745

1

0

On my Atezr L2 with movable Z axis I am trying to make the laser head drop down .5mm per pass, is this the correct setting? or should I go to .75 or even a full mm?Here is how I have it set now:

Liam

2023-10-24

749

1

0

Is it possible with Lightburn to move the laser to last position with a command and not the mouse curser?

jessie

2023-10-23

1K

1

0

So I want the yellow to fill, but the red lettering to just be line a with no fill. How is this achievable if it even is?

Patrick

2023-10-23

724

1

0

Recently, Bystronic of Switzerland released its financial report for the third quarter of 2023. The financial report shows that in the first three quarters of this fiscal year, due to the liquidation of backlog orders, Swiss Super 100's sales increased by 2.1% at a fixed exchange rate. However, due to the strong performance of the Swiss franc, espe...

Clarence

2023-10-20

716

1

0

I just received a new Atomstack A 40 Pro. I have contacted Atomstack with this problem but I get no response. Maybe someone on here can help. It is supposed to achieve 30,000 mm/min but I can only get it to move at about 6000 mm/min. the baud rate is set at 115,200. Should it be set at a different rate? If baud rate is not the problem, what do I do...

Gilbert

2023-10-20

880

1

0

When going to help to search for info and I click a returned result, the menus at the stop responding. You can click through all menus and they highlight but they no longer respond by opening the menu items that are normally displayed. Clicking application name, Lightburn, at the top of the screen also doesn’t respond. If I go back to search ...

Cyril

2023-10-20

745

1

0

CinIonic is a global leader in Barco's company and laser cinema technology. Today, at the SMPTE 2023 Media Technology Summit held in Hollywood, a new Barco laser projector specifically designed for post production was unveiled. As part of the company's award-winning Barco Series 4 laser series, the Barco Series 4 SP4K-P is the first laser projector...

Smith

2023-10-19

858

1

0

Buongiorno, dopo l’aggiornamento di lightburn alla versione 1.4.03 è sparita la funzione “constant power mode” dall’impostazione dei livelli.Qualcuno sa dirmi come riattivarlo o se è un bug da segnalare?Leggendo altre discussioni mi pare di capire che è una funzione presente in tutte le versioni

Abel

2023-10-19

744

1

0