Running Lightburn on the F1. I have several different files but every time I open a file to engrave metal I have to click a tab and enable the red laser in order for it to engrave. Is there a way of enabling the red laser in the file itself or the machine settings?
2023-09-1841110The question is will the laserburn camara work with the Algolaser Delta. Thanks for any help.
2023-09-1832210Innovative direction-tunable laser design enables beam steerability necessary for lidar applications and 3D sensing. Credit: T.C. Lu, National Yang Ming Chiao Tung UniversityLasers find applications across several fields ranging from telecommunications and remote sensing to medicine. There are many ways in which one can generate laser emiss...
2023-09-1842310Good day, for the past week I keep creating designs and saving them and the moment I exit document the file is empty and does not want to open. When trying to open I receive an error saying path does not exist.I do not know if this is related but Lightburn also keeps crashing. I received an automated file on my desktop from the Lightburn applicatio...
2023-09-1635510I want to make a multi-layer picture frame where some text and images overhang into the photo frame area. What I ahve so far is the representative frame and center-part to cut out, with some text on the top and bottom. The text will be filled so it’s darkened and visible regardless if it is cut-out or on the top of the frame.I was able to use...
2023-09-1634710hello memberscan someone help me, I want rectangle 2 to be 5 mm closer to rectangle 1 in the same line.What is the best way to do this so that they stay in the same line?would like to heargreetings Ronald
2023-09-1639910I have imported an image which is the template I have to draw according to.Every time I use “Edit nodes” and click on one of my shapes, it is the layer with the image that becomes active.Is there a solution to my problem?
2023-09-1535110Hi,I keep having issues with limits. (XTool D1). I’m using start from current position on a cut that looks fine in the grid and also frames with no issues.Then I cut and it hits limits and the job hard crashes.I have to be using current position as I’m aligning material precisely and have things holding it in place that would be difficu...
2023-09-1538810This is my first laser - I really appreciate the support here. I have things aligned pretty well in x,y,z - but the beam isn’t quite centered in the cutting head - I have the lens/nozzle removed and just firing down onto a piece of tape stuck to where the nozzle usually screws on.I can modify the mirror bracket for the 2nd mirror to f...
2023-09-1447010Trying to add a name to a design. Go to weld or boloean name to design and the name disappears. Any ideas?After Weld
2023-09-1445310Is there any way in LB to turn on/off output for only some of the objects in a given setup like i have here since they are in the same layer or layers? In my current set up im still dialing in my settings and don’t want to run all 4 of these each time I run a test. Is there a way to only run 1 of them since they are in the same layers?OR if ...
2023-09-1426610Static droplet array (SDA) is a necessary and indispensable tool for high-capacity screening testing or determination of specific cells or analytes (whose chemical components are substances that identify targets) for identification and targeting. However, extracting and collecting target droplets containing unique analytes or cells from SDA remains...
2023-09-1435810In order to develop photon like brain computing technology, a research team at Strathclyde University integrated spike based neural networks with semiconductor lasers that display the behavior of spike neurons.They demonstrated high-performance photon spike neural network operations and lower training requirements, and initiated a novel training sc...
2023-09-1431910Disclaimer: this seems to be a hardware issue as behavior is identical with Lighburn and EZCAD2I recently acquired an OMTech 50W Raycus machine with a seemingly genuine BJJCZ controller.The machine connects. The galvo head is operational. The RED LED from the laser source functions (no way for me to toggle it, it’s always on). LED1 on the BJ...
2023-09-1348911Hi, a few months ago I decided to clean the lenses on my sculpfun s10, because i saw that i had to lower the speed in order to cut wood. Since then i struggled a lot to cut everything. I tried reinstalling lightburn, fixing the S-max value and changing motherboard. Even after all of this at 200mm/min 95% i can only cut paper and slightly engrave wo...
2023-09-1348910
- Veri Yok
Türkçe
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski