have a Creality Falcon2 22 watt laser. I am running the most current version of a licensed version of Lightburn on a Dell XPS with Windows 11. Everything was working fine yesterday but when I went to run a file from yesterday and a new one from today both frame and engrave upside down/backwards. I even went as far as to delete Lightburn and reinsta...

Roderick

2024-12-11

428

3

0

Hello. I jusy bought the new Creality rotary chuck to go with my Elegoo Phecda. I have the chuck plugged into the y axis cable. In lightburn, I have the rotary tool enabled, step set to what was provided in the manual, and measurements of the object. I also turned off the homing feature for my after market limit switches.The problem is that, when ...

Clarence

2024-01-16

363

2

0

The use environment of the cleaning machine leads to a weakened effect1. High or low ambient temperature: Laser cleaning machines are generally suitable for ambient temperatures between 5 ℃ and 35 ℃. If the ambient temperature is too high or too low, it will affect the normal operation of the laser cleaning machine, resulting in a weakened cleaning...

Abel

2024-12-13

379

0

0

Reasons for laser weld indentation problemDuring the laser welding process, the welding area is subjected to high temperatures, which can cause deformation due to thermal expansion and contraction, resulting in a concave weld seam. In addition, the selection of welding materials and welding parameters can also affect the occurrence of weld indentat...

Marshall

2024-12-12

406

1

0

Reasons for the appearance of color in laser welding seamsDuring laser welding, if the welding parameters are not appropriate, it often leads to the appearance of color in the weld seam. This problem mainly occurs on high reflective materials such as stainless steel, aluminum alloys, and titanium alloys. After analysis, in addition to inappropriate...

Tory

2024-12-11

410

0

0

I’ve had my laser for A. Bout. And the horizontal lines are starting to bump or drag. I have to keep this fresh and people’s minds because.

Roderick

2024-12-10

337

1

0

When choosing a laser cleaning machine, to ensure the selection of suitable equipment, users need to pay attention to and confirm the following key parameters:1、 Laser powerLaser power is an important factor affecting the cleaning effect and speed. Generally speaking, the higher the power, the better the cleaning effect and the faster the speed. ...

Christian

2024-12-10

482

0

0

Handheld laser welding machines, as an important tool in modern welding technology, have been widely used in various industries due to their high efficiency, precision, and flexibility. However, correct operating techniques and safety precautions are key to ensuring welding quality and operator safety. This article will provide a detailed introduct...

Smith

2024-12-09

376

0

0

Recently, when I try to engrave using my Xtool D1 pro, the engraving is way off. When I frame the job, everything looks fine. But once I start to engrave, the laser moves roughly 1.5 inches to the left. This has happened consistently over the last month. I’ve managed the engraving by manually adjusting the starting point of the laser.Today, I trie...

Tim Johnson

2024-12-06

340

2

0

The laser stops firing in the meddle of the job but the head doesn’t stops. When that happens, the head eventually stops, moves back and tries to keep engraving where it stops. The problem with that is that when that happens it never restart in the same position, making a really noticeable line along the path. That line is just shifted from the “or...

Jack Wilborn

2024-12-07

378

1

0

Introduction to Laser CladdingLaser cladding is a process of partially melting the surface of a material by irradiating it with a laser beam, spraying powder or wire onto the melted surface to generate a new surface layer. It can be used to repair damaged components, improve surface hardness, enhance surface performance, etc.Factors affecting the...

Vasili

2024-12-06

356

0

0

Hello,I also have the problem that when transferring data I get the error message that an error occurred while sending (the device may be busy or stopped).In the forum I found a post that you can try to set "enable DTR signal" in the device settings.Where exactly can I select this in the device settings?

JOST

2024-12-05

363

1

0

Power failure1. Check if the power cord is securely plugged in;2. Check if the power cord is damaged;3. Check if the power supply is working properly.Laser malfunction1. Check if the laser is working properly;2. Check if the laser cable is securely plugged in;3. Check if the laser cable is damaged.Other reasons1. Check if the light tube has expi...

Clarence

2024-12-04

358

0

0

Multiple methods can be used to avoid the problem of laser welding undercutting, such as optimizing process parameters, reducing welding speed, optimizing plate edges, etc.Reasons for laser welding edge biting problemThe problem of laser welding undercutting refers to the phenomenon of excessive melting and compression at the welding point during ...

Smith

2024-12-02

409

2

0

Problem OverviewThe inability of laser cladding powder to hang refers to the phenomenon where the powder cannot uniformly adhere to the substrate during the laser scanning process, resulting in phenomena such as powder falling off. This phenomenon not only affects the processing effect, but may also damage the equipment.Root cause analysis of the...

Cyril

2024-12-03

397

1

0