I am importing a shape from a dxf file that includes the line and associated fill. When imported the fill is removed with only the line element showing. How are drawing elements with fill (solid/hatch) imported into LightBurn to retain the fill? Also, how are images imported into LightBurn so the background is transparent? Is there a way to add fil...

Carey

2024-01-24

238

1

0

Hello, I have a Just purchased a 100 watt omtech, I was wanting to know how long should I run the chiller after shutting down the laser?

Andre J

2024-01-24

239

2

0

Hi guys,From the picture you can see that the cut is not straight along the Y axis but the cut along the X axis is straight! Not sure how the fix because if it was the lens focus issue the cut along the X axis wouldn’t be straight as well, right?I’m using a 2" lens, 90w CO2 laser , the material I’m cutting it’s a 5mm acrylic...

Erdogan

2024-01-23

257

1

0

Can the Cut Pallete settings be set permanently? and NOT let the projects overwrite the Cut Pallete?Or at least an option to turn this feature off?

Ruddy

2024-01-23

253

1

0

my laser homes okay, yet when selecting a orgin, a green busy timer bar appears and it takes up to seven minutes to reach the origin point. this is a 10w rolylasermatic, and it’s new. most of my attempts to frame, cause the laser to crash back towards the left lower position. I really have no control compared to watching YouTube videos, my la...

Aaron

2024-01-22

295

1

0

Hello, I have an Ortur LM3 LE and it does misses cuts randomly, some of the cuts are perfect, and some are missed, and can’t find the reason.I would appreciate any suggestions.

Jack Wilborn

2024-01-22

249

2

0

I want to open two files in the same window so i can part them together to create one design. Ive tried a few ways but my noobee is strong. L0l please help. Thank you for help

AL.TAL

2024-01-22

269

2

0

I was using my new machine successfully untill suddenly, waiting for connection even though its stating READY? I did not unplug or changed anything.I have tried restarting and re-plugging everything by now. I want to cry! please please help

55455rml

2024-01-20

246

1

0

Hi, I have been using Lightburn on my Sainsmart Genmitsu LC-40 for a few months with great success but recently its started to engrave all objects and all layers on the work surface whether selected or not? I think the issue started after updating with 1.4.01 but still persists with 1.4.05? I have deleted Lightburn and reinstalled (even with earlie...

RTP

2024-01-20

269

2

0

How do I divide a line into equal sections, say 4 or 5 or 9 o whatever?I ask because I use lightburn to design buildings for my HO scale model trains. If I want to have a building front with several equally spaced windows, I need to find a fairly simple way to accomplish this, rather than the trial and error method I’ve been using.Same goes f...

Williams

2024-01-20

240

4

0

Hi allDoes anyone know if it’s possible to connect to an iCube via my WiFi network and use Lightburn?I’m on a MacBook Air M1 running Sonoma 14.1.2Thanks!

Silvano

2024-01-19

347

1

0

HiIs there any way to bend shapes around a path. Similar to bending text along a path?I have a straight line with tabs along it and want to bend this into a circle but keeping the tabs the same length. I want to use living hinges to make a round box but want the tabs to be in the right places to match the slots in the bottom piece. Is there a way...

Noah

2024-01-19

256

1

0

ALARM:1Hard limit triggered. Machine position is likely lost due to sudden and immediate halt. Re-homing is highly recommended.[MSG:alarmCodeCodeIntHandle:1]Grbl V1.055 [‘$’ for help][MSG:Check limits][MSG:‘$H’|‘$X’ to unlock][MSG:Caution: Unlocked]okGrbl V1.055 [‘$’ for help]

Durell

2024-01-19

270

2

0

Problem with engraving a photo, laser starts in lightburn software and then freezes, don’t know where to look for the cause. Anyone have some idea? Photo of error

roy

2024-01-18

231

1

0

1. Create a box.2. Convert to path.3. Break the nodes at top left corner and bottom right corner. Result - 2 paths.How do you re-connect or weld the verts back together? Close path doesn’t seem to do it. Nor can I find a way to get them to reconnect. I don’t see a weld or join node/vert function.Thanks.

jessie

2024-01-18

231

2

0