When debugging the RDC6585G controller, I found that the cutting head could not be controlled properly and there was no response no matter how it was operated. At the same time, the working indicator ...

• RDC6585G
• control system
• laser cutting
• RuiDa

I encountered an issue with setting invalid positioning points while using the RDC6585G controller for device debugging. When I tried to set the positioning point through the control panel, no matter ...

• RDC6585G
• control system
• laser cutting
• RuiDa

When using the RDC6585G controller, the device always displays a collision warning with the pressure limit switch after each power on. Even if the power is turned off and restarted, the laser head con...

• RDC6585G
• control system
• RuiDa

My device control system model is RDC6585G, and I encountered a problem. I pressed the directional keys once on the control panel, and the machine continued to move in the same direction, as if the ke...

• motion system
• RDC6585G
• control system
• laser cutting
• RuiDa

My CO2 cutting machine uses the RDC6585G control system, how to install USB driver? We need detailed steps, thank you!

• USB
• RDC6585G
• control system
• CO₂ laser

I operate a CO2 laser engraving machine for engraving, with the control system being RDC6585G. The light intensity and speed settings meet conventional requirements, and the engraved patterns and text...

• power supply
• beam delivery system
• RDC6585G
• laser engraving
• RuiDa

I have a CO2 cutting machine equipped with a Ruida controller, model RDC6585G. I encountered a strange phenomenon: when I press Z- or Z+ for a longer duration (about 3-4S), the Z-axis will keep moving...

• coordinate axis
• RDC6585G
• control system
• CO₂ laser
• RuiDa

My CO2 laser cutting machine is equipped with a RDC6585G control system. I encountered a problem that I am at a loss for solutions. The machine moves along the frame normally, but there is no response...

• RDC6585G
• control system
• laser cutting
• RuiDa

I am using the RDC6585G controller and the Err light is on, what should I do? Do I need to return it to the factory for repair? Is there any other solution?

• RDC6585G
• control system
• CO₂ laser
• RuiDa

I have a CO2 laser cutting machine that is paired with the RDC6585G control system. When I operate it, the laser output is noticeably weak, and there is no response when trying to adjust the power or ...

• RDC6585G
• control system
• CO₂ laser
• laser cutting
• RuiDa

I have a CO2 laser cutting machine that uses the RDC6585G control system. When I import files and cut square objects, the final result is a parallelogram, which is really frustrating. I have tried sev...

• coordinate axis
• RDC6585G
• CO₂ laser
• laser cutting
• RuiDa

I use the RDC6585G vibrating blade cutting system, which was able to perform normal cutting before. However, after replacing the blade, the cutting accuracy decreased and the cutting path deviated fro...

• RDC6585G
• control system
• RuiDa

My cutting machine uses the Ruida system, RDC6585G， During the scanning process, the graphics were normal from the beginning, but gradually deviated as the scanning progressed, with the deviation angl...

• RDC6585G
• control system
• CO₂ laser
• laser cutting
• RuiDa