- Не решено
Can standard proximity sensors and mechanical limit switches be installed on each axis?
Can I install both proximity sensors and mechanical limit switches on each axis of a Ruida RDC 6445S controller? I'd like the proximity sensors to act as the primary reference, with mechanical switche...
- RDC6445S
- laser head
- control system
- RuiDa
- 2 пользователей ответили
55 - Не решено
RDC6445S controller fault assistance
Motherboard: RDC6445S, Version: V26.01.16 Fault Description: Y-axis drift — When running a frame cycle, the Y-axis returns to the home position with a consistent offset in the same direction each ti...
- motion system
- coordinate axis
- RDC6445S
- control system
- RuiDa
- 1 пользователь ответил
45 - Не решено
RDC6445S manufacturer parameter settings issue
I have an RDC6445S controller on a dual-head laser machine with independent offset capability. The distance between the two laser heads is 170mm, and the cutting area is 1600×1000mm. In the manufactur...
- coordinate axis
- RDC6445S
- laser head
- control system
- RuiDa
- 1 пользователь ответил
39 - Не решено
RDC6445S: Multi-object cutting misalignment when using dual-head independent offset
How to avoid misalignment when cutting multiple virtual array elements? My controller is RDC6445S
- RDC6445S
- laser cutting
- RuiDa
- 1 пользователь ответил
37 - Не решено
The air assist switch enabled by RDC 6445S in LightBurn is not responding
My Ruida RDC6445S controller (firmware version RDC6445S-V26.01.19) does not respond to the Air Assist switch command enabled in LightBurn. However, the solenoid valve operates normally when connected ...
- assist gas system
- power supply
- RDC6445S
- LightBurn
- RuiDa
- 1 пользователь ответил
51 RDC6445S 主板授权功能操作指南（附中英文文档）
RDC6445S主板授权功能操作指导【含中英文文档附件】 激活主板 首次修改授权码需要对主板进行激活，激活步骤如下 首先从主界面进入授权界面--菜单栏->设置->密码设置->【设置授权】界面 进入【设置授权】界面后，该界面功能如下 【激活/更改授权码】：激活主板或修改授权码 【读取】：读取已连接主板的授权码 【复制】：复制授权码 【密码设置】：修改厂家密码 【授权设置】：生成授权码 激活主板之前...
- RDWorksV8
- RDC6445S
- control system
- RuiDa
Ignativs3600- Не решено
how to connect the co2 laser machine with the pc through wifi?
CO2 LASER CONNECTION THROUGH WIFI
- RDC6445S
- laser cutting
- 2 пользователей ответили
260 Issue with CN6 of Ruida Controller RDC6445S(EC)
I have 150W Chinese Laser machine, it is is fitted with Ruida RDC6445S(EC), it is double head laser machine. Head 1 is connected with CN-5 and Head 2 is connected with CN-6. I have issue since I recei...
- RDWorksV8
- RDC6445S
- control system
- RuiDa
C915A9E22.3K152RDC6445S problem
I've been working with a Wattsan 0503 with the Ruida RDC6445S controller for 3 years and suddenly my machine has a problem. I turned to the reseller in the EU, but until today have gotten no solution ...
- RDWorksV8
- RDC6445S
- LightBurn
- control system
- RuiDa
0880C1A81.3K391!!!Urgent Need Help for Laser machine cutting ray6 stuck on file menu
The system freezes when accessing the File menu. I cannot click any buttons, and an error message appears as shown in the screenshot. I also cannot read, delete, or manage any files from the File menu...
- RDWorksV8
- RDC6445S
- control system
- RuiDa
CBE1A5C71.6K11Issue beetween Ruida Controller RDC6445S(EC) and RDWorks
Dear Sir, We have an RDC6445S working in a LaserSaur machine, the cutting file come from RDWorks through USB cable. If we place a speed of 100 mm/s in RDworks, the file receive by RDC6445S shows on ...
- coordinate axis
- RDWorksV8
- RDC6445S
- control system
- RuiDa
Richard CO22.2K96RDC6445S Questions.
Dear technical department I recently purchased 2 units of the RDC6445S controller to install on two laser cutting machines and I have some questions to ask. 1 - What is the function of the IN1 input o...
- RDC6445S
- control system
- laser cutting
- RuiDa
Ferreira 641.2K20photo engrave
even with a 1mb jpeg photo...i get "not enough buffer space.....can cut shapes, but cant do photo engrave.... 6445S....i'm guessing this is a parameter.....i have 450mm x 380mm working space....even r...
- RDC6445S
- laser engraving
- RuiDa
44CFD7021.1K10Ruida RDC6445S Reboot Loop Issue? Help!
Hello, I did a rebuild of a Muse 2D and I got it working fine. In the past 2 weeks it started acting up during cuts. It will randomly reboot. It doesn't happen consistently like after a certain time,...
- power supply
- RDC6445S
- control system
- RuiDa
fCrtGR6q2K21Issues with speed Ruida RDC6445S.. please help!
Hallo everyone! I hope you can help me, I’m slowly running out of ideas. I’ve upgraded my old 130w CO2 laser from a Puhan Ph3 controller to a new Ruida RDC6445S controller (complete set). Laser powe...
- RDWorksV8
- RDC6445S
- LightBurn
- CO₂ laser
- RuiDa
Pr0phezz1.4K11
RDC6445S
16
Темы1
ПодписчикОжидают ответа
- RDworksV8可以加工锤子画吗？
- Where can I download the firmware upgrade file for the RDC6445 series controller?
- After installing the RDWorksV8 plugin in CorelDRAW, how can I do engraving and cutting at the same time?
- Edge tracing for contour cutting
- How do I adjust the time displayed on the C320？
- problema na cnc
- Mantisoft User guide or Manual
Copyright © 2021 Shenzhen Chanelink Network Technology Co., Ltd. All Rights Reserved.