Yamazaki Mazak, a machine tool processing solution provider headquartered in Japan, recently announced that two laser processing machines for cutting pipes and metal sheets, FG-400 NEO and OPTIPLEX 3015 NEO 15 kW, will be launched at EuroBLECH, held in Hanover, Germany, from October 25 to 28.Photo source: Yamazaki MazakFG－400 NEOIt is re...
2022-09-2454100On September 17, the General Department of Customs and Regulations of the Chinese Academy of Sciences held the 2022 annual interim work report meeting of the Class A pilot special "Advanced Direct Drive Laser Technology" project of the Chinese Academy of Sciences online. A total of 72 people, including Zhang Jie, academician of the CAS Member, Li X...
2022-09-2360100Recently, a research cooperation team in the United States announced that they could accelerate the electron within 20 cm to the speed that is usually reached only by particle accelerators with the size of 10 football fields through the precise control of ultrafast lasers.It is reported that a team led by Howard Milchberg, a professor of ph...
2022-09-2348100Albasense, a start-up company operating independently from the University of Western Scotland (UWS), is expected to overturn the global photon imaging and sensor industry. Albasense originated from the Institute of Thin Films, Sensors and Imaging (ITFSI) of UWS and is the third start-up company independent from the university. The company will use ...
2022-09-2355000On September 22, Xuhai Optoelectronics, a medium and high-end optical device provider based on the micro optics hybrid integration platform, completed a round of financing of tens of millions of RMB. This round of financing was invested by Tongke Shenghua Fund and Xuzhou Science and Innovation Venture Capital Fund. Staring Capital, as an exclusive ...
2022-09-2355300VCSEL, or Vertical Cavity Surface Emitting Laser, is a kind of semiconductor laser. At present, the majority of VCSELs are based on GaAs semiconductor, and the emission wavelength is mainly in the near-infrared band.Data communication application is the first batch application of VCSEL technology. Since November 2017, Apple has released the...
2022-09-2242000Analysis of global laser processing equipment market scaleAs an advanced processing technology, compared with traditional mechanical processing, laser processing can greatly improve the processing efficiency, which is in line with the development direction of intelligent manufacturing and drives the stable growth of the global laser process...
2022-09-2252800Recently, Network Rail, the British railway network, announced that it was testing a new laser technology to remove leaf litter on the railway at a speed of 60 miles per hour.It is reported that when leaves and grass are pressed on the rail, they will form a layer of oil film, causing a driving condition similar to "black ice" skidding, whi...
2022-09-2259500In order to cut costs and retain sufficient cash, Ouster, an American lidar company, announced about 30 layoffs (accounting for about 10% of the company's total employees) as part of a broader "downsizing" measure.Ouster is one of several lidar technology development companies that raised funds through SPAC backdoor listing in recent years....
2022-09-2243500The laser cutting machine is to focus the laser emitted from the laser into a high power density laser beam through the optical path system. The laser beam shines on the surface of the workpiece to make the workpiece reach the melting point or boiling point, while the high-pressure gas coaxial with the beam will blow away the molten or vaporized me...
2022-09-2158900(1) SkinningThis is because the matrix does not form a molten pool and there is no metallurgical bond between the powder and the matrix. Possible causes are: low power; Too much powder; The linear speed is too fast; There is oil stain or electroplated coating on the surface of the workpiece.(2) CracksThe reasons for cracks in the coating ar...
2022-09-21706003D printing creates the highest specific strength titanium alloy.Photo source: Monash University, AustraliaThe scientific research team led by Australian engineers wrote in the latest issue of Nature Materials that they used 3D printing method for the first time to obtain the titanium alloy with the highest specific strength so far, which...
2022-09-2161100"The laser application field shows a trend of explosive growth. China has become the world's largest industrial laser system market, and the laser industry will be a market of 100 billion in the future." Shao Huo, secretary-general of Shenzhen Laser Intelligent Manufacturing Industry Association, said in an interview with reporters, "Accelerating t...
2022-09-2145100The research team of Professor Sun Hongbo and Associate Professor Lin Linhan from the Department of Precision Instruments of Tsinghua University proposed a new technology of nano particle 3D laser assembly based on chemical bonding by using photo generated high-energy carriers to control the surface chemical activity of nano materials.Based...
2022-09-2059500Recently, Shenzhen Huanchuang Technology Co., Ltd. (hereinafter referred to as "Huanchuang Technology") announced the completion of C1 round financing of nearly 100 million yuan. This round of financing was led by Tongge Venture Capital, followed by HTC's industrial fund and Shenzhen Zhicheng Group under SASAC.Previously, Huanchuang Technol...
2022-09-2058500
- Нет данных
Русский
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski