In order to develop photon like brain computing technology, a research team at Strathclyde University integrated spike based neural networks with semiconductor lasers that display the behavior of spike neurons.They demonstrated high-performance photon spike neural network operations and lower training requirements, and initiated a novel training sc...

Marshall

2023-09-14

645

1

0

1. Vibration reduction and blocking measuresWhen installing the gear transmission system, efforts should be made to avoid resonance and noise generation between the body and the foundation support and connecting parts. The gear transmission system often experiences resonance of one or several gears within certain speed ranges, except for design rea...

Marshall

2023-09-14

843

1

0

Disclaimer: this seems to be a hardware issue as behavior is identical with Lighburn and EZCAD2I recently acquired an OMTech 50W Raycus machine with a seemingly genuine BJJCZ controller.The machine connects. The galvo head is operational. The RED LED from the laser source functions (no way for me to toggle it, it’s always on). LED1 on the BJ...

Nugent

2023-09-13

873

1

1

Hi, a few months ago I decided to clean the lenses on my sculpfun s10, because i saw that i had to lower the speed in order to cut wood. Since then i struggled a lot to cut everything. I tried reinstalling lightburn, fixing the S-max value and changing motherboard. Even after all of this at 200mm/min 95% i can only cut paper and slightly engrave wo...

Christian

2023-09-13

875

1

0

How to import a font e.g. The Times

Patrick

2023-09-13

645

1

0

StenTech® Inc., a leading multinational SMT printing solutions company, is pleased to announce the installation of a new, state-of-the-art laser system at its facility in Guadalajara, Mexico.This investment in the latest StencilLaser G6080, manufactured by LPKF Laser & Electronics in Germany, marks an important milestone for the SMT...

jessie

2023-09-13

670

1

0

Wayne Tupoula, CEO of Laser Photonics, commented, "Our DefenseTech and CleanTech lines are ideal for rougher, cleaning, finishing, pre - and post-weld applications, which is why we are looking forward to showcasing them at this year's event."The DefenseTech range uses laser cleaning and laser marking technology and is designed to meet the needs o...

roy

2023-09-13

834

1

0

When the printing equipment is working, the temperature of the plate, ink and paper will affect the printing quality and the service life of the press. For example, the printing plate temperature is too high, which will cause the paper to be deformed by heat, resulting in a decline in printing quality; The temperature of the ink will affect the uni...

Liam

2023-09-13

664

1

0

I like and understand layer names in settings or global for current and future projects.However, is there a way to have local layers only?For example, I cut between 1-5mm thick material. I like the idea of setting layer 05 to the settings I need for 1.5 mm material, which I use most often. But when I use 5 mm material, I need to change 05 to a slow...

Miller

2023-09-12

914

1

0

I have a project that has 100 little circles that are all the same size, but not in a straight line pattern. Is there any way to change the size of all the dots without having to do each one individually?

Darren

2023-09-12

811

1

0

My text is always mirrored when I engrave something.Can somebody tell me how to fix it?

Cyril

2023-09-12

931

1

0

Constructing a continuous laser source with a device area of less than 1μm2 can meet the low energy requirements of on-chip optical interconnection (< 10 fJ bit-1) is of great significance. However, as the device size decreases, optical and material losses increase significantly, so achieving sub-micron device size and continuous optical ...

Gilbert

2023-09-12

760

1

0

Design reasons and countermeasures1. Gear accuracy levelIn the design of gear transmission system, the designer often considers the economic factors and determines the precision level of the gear as economically as possible, but the precision level is the mark of the noise level and backlash of the gear. The American Gear Manufacturing Association...

Clarence

2023-09-12

601

1

0

Manufacturing reasons and countermeasures1. Error impactThe main errors of transmission noise are the tooth shape error, tooth distance error and tooth direction error in manufacturing process. It is also a problem that the accuracy of gear transmission is difficult to ensure.The noise of the gear with small tooth profile error and small t...

Terrelle

2023-09-12

731

1

0

I am getting back into burning after a while. I upgraded my Ortur laser to the 10 Watt and i am seeing the edges of picture over burning. I attached a picture. I am guessing it is something simple.

Tory

2023-09-11

799

1

0