Running lightburn on opensuse 15.4 linux on two computers. A custom built workstation and an older DELL laptop. I recently purchased the Atomstack camera kit for lightburn. I can not get the camera to work on either computer. Also can not get a logitech C720 working on either computer. The respective cameras both show up in the camera window. On th...
2023-04-0440710High-performance, low-cost and miniaturized narrow-width lasers are urgently needed for many high-tech applications and major scientific research projects in the future. These applications include frequency modulation continuous wave lidar, which is likely to be used in the future autonomous driving, coherent laser communication for low-orbit satel...
2023-04-0427810Is there a commad to make the laser head return to home after job finish instead of returning to sart position
2023-04-0447010All of the sudden, all my images appear upside down when I view them in preview mode. If I reset my device setting to the top-left instead of the bottom-left, they simply reverse. Before today, an image looked the same in both the work area and when I previewed it.
2023-04-0425710A file I uploaded won’t cut or engraving because of “no output layers selected for output” error message. The thing is…in the cuts/layers screen there is not an “output” toggle. Can someone please help me?Thank you
2023-04-0431310Modern lightweight structures have long helped save fuel and materials and reduce the environmental burden of automotive engineering and the aircraft industry. Researchers at the Fraunhofer Institute for Materials and Beam Technology, IWS, have now found a way to transfer this proven design principle to other industries.To do this, they used lase...
2023-04-0445700An ultra-efficient on-chip supercontinuous laser developed by researchers at the University of Twente holds promise for applications ranging from portable medical imaging devices to chemical sensing and lidar. The researchers' design is able to control the dispersion of light in the laser system by alternately widening and narrowing the beam.Lase...
2023-04-0441700has a problem with Trocen product anyone help? im from mexico
2022-11-1635020Hi there,I wanted to share the gradient charts i’ve created, because i find them extremely useful. They are set to be done on an A4-sized material (297x210mm) but you can of course resize them as you wish.You will find all charts in Lightburn format herebelow.Speed and Power values should be ok with most of the recent machines, like X-tool, ...
2023-04-0133420Professor Ma Cheng of the University of Science and Technology of China (USTC) has proposed a new technology route for all-solid-state battery cathode materials, which can significantly increase the amount of active material in the composite cathode, thus more fully realizing the energy density potential of all-solid-state lithium batteries. The re...
2023-04-0343610Is it possible to laser cut mat board from Dollar Tree for making mat board for picture framing?
2023-04-0345510Imported an image into LB file many weeks/months ago, how can I find out what the original image was when imported? Want to make some adjustments to img, but can’t find. Possible or not?
2023-04-0338910Hello! I am unable to control the laser machine Sculpfun S30’s power intensity. It only works at one (low) level of power intensity, and I can’t change it. Any help will be much appreciated. Thank you in advance.
2023-04-0331110I have a Creality Falcon, when I use a TF card Frame will show the laser and where it’s going to work, however when I plug it into my computer Lightburn does not show the laser while doing a Frame. I have the laser turned on while framing on and the fire button is also on. Am I missing something?
2023-04-0346710I’ve just installed it, the device is connected as can be seen from the highlighted line in the terminal in the screenshot, but nothing shows up. I’ve added myself to dialout and tty, as per these instructions but it just doesn’t work.What am I missing?
2023-04-0326010
- Sem Dados
Português
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski