- Nie rozwiązane
Why can't my RDC6442G system connect to Windows 10?
Everything was normal before. I changed my computer to Windows 10, but I still couldn't connect to the RDC6442G control system. What's the reason?
- RDC6442G
- control system
- RuiDa
- 2 użytkowników odpowiedziało
51 - Nie rozwiązane
In RDWorksV8, the canvas has negative coordinates at the top-left corner, but the machine's top-left corner is positive. How can I unify the coordinate systems?
Our current setup uses an RDC6442G controller with RDWorksV8 as the host software. I have thoroughly reviewed the full list of manufacturer parameters, but there is no dedicated setting for the homin...
- RDC6442G
- RDWorksV8
- control system
- RuiDa
- 1 użytkownik odpowiedział
52 - Rozwiązane
How to solve the problem of collision when the RDC6442G controller is enabled with absolute coordinates?
I have a CO2 laser cutting machine with a control system of RUIDA's RDC6442G. I have enabled absolute coordinates, but the equipment suddenly moves rapidly in the wrong direction while executing proce...
- RDC6442G
- control system
- CO₂ laser
- RuiDa
- 3 użytkowników odpowiedziało
207 - Nie rozwiązane
The file cannot be downloaded to the RDC6442G controller
I don't know why, but I couldn't successfully download the file to the RDC6442G controller. When I transferred the design file to the controller through the USB interface, the system didn't respond, a...
- RDC6442G
- control system
- laser cutting
- RuiDa
- 1 użytkownik odpowiedział
223 - Rozwiązane
RDC6442G controller laser head does not return to the positioning point
When using the RDC6442G controller for processing, the laser head automatically returns to the set positioning point after processing, and the process is normal. But after I press the exit or end task...
- RDC6442G
- laser head
- control system
- laser cutting
- RuiDa
- 3 użytkowników odpowiedziało
321 - Rozwiązane
In the RDC6442G controller, the multi-point positioning function cannot be used when the U-axis rotates
My controller is RDC6442G. I set the U-axis as the rotation axis and found that the multi-point positioning function cannot be enabled. No matter how I adjust the software parameters, the system still...
- rotate
- coordinate axis
- RDC6442G
- control system
- RuiDa
- 1 użytkownik odpowiedział
237 - Rozwiązane
The RDC6442G control system experiences incorrect movements during the dual-head mutual movement
My CO2 cutting machine uses a Ruida controller, model RDC6442G. During processing, when the dual-head mutual movement function is enabled, the two cutting heads exhibit a phenomenon of disordered move...
- RDC6442G
- control system
- CO₂ laser
- laser cutting
- RuiDa
- 3 użytkowników odpowiedziało
285 How to solve the problem that the CO2 cutting and engraving controller keeps pressing the limit switch after being turned on?
In CO₂ cutting and engraving equipment, if the limit switch is continuously pressed after startup, there are generally two reasons: 1. Check whether the limit switch itself is functioning properly Fi...
- RDC6442G
- RDC6445G
- control system
- CO₂ laser
- RuiDa
Caspar30015What should you do if the control system of the CO2 laser cutting and engraving series cannot be reset to its original point?
If your control system is one of the RDC6442G, RDC6445G, RDC6585G, RDC6685U, RDC6332NM, RDC6612U, or RDC8445S models from the CO2 laser cutting and engraving series and you encounter an issue where it...
- coordinate axis
- RDC6442G
- RDC6445G
- CO₂ laser
- RuiDa
Howard28322Connection failure of CO2 laser cutting and engraving controller panel
If you encounter issues with the CO2 laser cutting and engraving control system, such as the mainboard being unusable or the panel connection not displaying, you can conduct an inspection as follows: ...
- RDC6585G
- RDC6442G
- RDC6685U
- RDC6445G
- RuiDa
Michael27200CO2 cutting and carving control system, how to install USB driver?
The following are measures on how to install USB drivers when using the CO2 cutting carving control system: 1. Connect the hardware: Connect the controller's mainboard to your computer using a USB c...
- USB
- RDC6442G
- RDC6445G
- CO₂ laser
- RuiDa
Adrian31411CO2 cutting and engraving system,laser engraving shows unevenness at the bottom,what should you do?
RDC6442G, RDC6445G, RDC6585G and other CO2 cutting and carving series control systems. If there is unevenness at the bottom of the carving, it can be adjusted according to the following methods. 1. C...
- RDC6585G
- RDC6442G
- RDC6445G
- laser engraving
- RuiDa
Gilbert30122CO2 cutting and carving control system, keeps moving after pressing the key once
When using the CO2 cutting and carving control system, if the button does not move or keeps moving after pressing the button once, the following points can be followed for troubleshooting and handling...
- RDC6585G
- RDC6442G
- RDC6445G
- CO₂ laser
- RuiDa
Clarence27500CO2 cutting and engraving control system: unable to download files to the board
When using the CO2 cutting and engraving control system, if you encounter a situation where files cannot be downloaded to the board, you can follow the steps below to troubleshoot and resolve the issu...
- RDC6442G
- RDC6445G
- control system
- CO₂ laser
- RuiDa
Payson31713What should you do if the positioning function of the CO₂ cutting and engraving series panel is not working?
When using the control system of the CO₂ cutting and engraving series, if the positioning function of the operation panel is not working, you can follow the steps below to troubleshoot and resolve the...
- RDC6585G
- RDC6442G
- RDC6445G
- CO₂ laser
- RuiDa
Gilbert30100
RDC6442G
32
Tematy26
Obserwujący
Oczekiwanie na odpowiedzi
- RDworksV8可以加工锤子画吗？
- Where can I download the firmware upgrade file for the RDC6445 series controller?
- After installing the RDWorksV8 plugin in CorelDRAW, how can I do engraving and cutting at the same time?
- Edge tracing for contour cutting
- How do I adjust the time displayed on the C320？
- problema na cnc
- Mantisoft User guide or Manual
Copyright © 2021 Shenzhen Chanelink Network Technology Co., Ltd. All Rights Reserved.