chanelink logo
CHANELINK
한국어

Scientists use glass to create femtosecond lasers

495
2023-09-28 17:12:33
번역 보기

Image source: Federal Institute of Technology in Lausanne, Switzerland

 

Science and Technology Daily, Beijing, September 27th (Reporter Zhang Jiaxin) Commercial femtosecond lasers are manufactured by placing optical components and their mounting bases on a substrate, which requires strict alignment of optical components. So, is it possible to manufacture femtosecond lasers entirely from glass? According to the latest issue of Optics magazine, scientists at the Federal Institute of Technology in Lausanne, Switzerland have successfully achieved this, with lasers no larger than credit cards and easier to align.

Researchers stated that due to the lower thermal expansion of glass compared to traditional substrates, it is a stable material. Therefore, they chose glass as the substrate and used commercial femtosecond lasers to etch special grooves on the glass to accurately place the basic components of the laser. Even in precision manufacturing at the micron level, the grooves and components themselves are not precise enough to achieve laser quality alignment. In other words, the reflector is not fully aligned, so at this stage, their glass device cannot be used as a laser.

So, researchers further designed etching to position a mirror in a groove with micro mechanical bending, which can locally twist the mirror when irradiated by femtosecond laser. By aligning the mirror in this way, they ultimately created a stable, small-scale femtosecond laser.

Despite its small size, the peak power of the laser is about 1 kilowatt, and the time to emit pulses is less than 200 femtoseconds, which is so short that light cannot pass through human hair.

This method of permanently aligning free space optical components through laser material interaction can be extended to various optical circuits, with extreme alignment resolutions as low as sub nanometer level.

 

Reprinted from：LDWORLD

관련 추천