Hi.I have laser machine with RDV6445G(EC) controller and SV300 CCD Camera.RDWorksV8(8.01.60) software.I trying to use Mark Positioning function. It has sussesesfully calibrates the camera andpasses Match Test.But when I start cutting the application crashes on firs recognizingof mark poin with Visual C++ Runtime error: application to term...
2023-06-161.2K30Hi all,I've just completed building a 600mm x 400mm 90w machine with an RDC6445G controller.I noticed (in the manual) that a tri-color warning lamp can be connected to the controller but I'm unsure how to do this. I did see a video on YouTube where a single lamp was connected to the 'Status' pin but I would like a three-color lamp (...
2023-06-0789310Hi, I have been trying to engrave the Text on wood using milling cutter, however when I import the file from Illustrator to Vcut works it changes the image and cuts only boarder lines as a cut out.How can i engrave the entire world instead of making it a cut out. Can any one guide ?Regards
2023-06-051.1K10The cutting drawing is not closed, and there is no problem with the drawing. How to solve this problem?
2023-01-091K20I am looking for help with my Ruida 6445G Controller. The problem is the Z Axis. I have tried multiple options. Trying to get the Z Axis to show me in mm the actual length is not happening. For 100mm on the Controller is only about 4mm movement. I tried using the Auto calculations of Entering this information and the stepper was set at 0.2 which th...
2023-01-301.3K112When RDC6563F is used, XY axis does not move manually.
2023-01-031.4K30Many users need a machine that can do the non-metal cutting with CO2 laser and metal cutting with fiber laser on one machine. that means there are 2 laser sources on a machine. one is CO2 laser and another is fiber laser.Ruida technology release a controller (model:RDC6563FG) that can support CO2 and finber laser . there are independent ports that...
2022-01-241.2K32I power laser on and it only displays connecting to controller. I have disconnected the him from the controller and nothing homes. I have led 15 and 12 lit up with eithernet discounted. Homing switches work chiller input works and all drives are good no faults. Any ideas?
2023-02-021.2K20Can sombody help me whit software Vcutwork ?After changing the mainboard i can't put the right parameters back before.I don't have backup .?The milling cutter and the knievs don't take the rise that i set from keyboard and they allways get up in the hom position to make the jump and i loos too much time in this mode .I need to know how can...
2023-02-081.1K21Once powered on, the cutting head will always move upward, and will not stop. Switch to the manual state, and the motor can be controlled to move, and then switch to the automatic mode, and always move upward.
2023-01-101.3K10The cutting head does not lift up and down, but the motor has sound.
2023-01-101K10After normal connection, press the auto-focus button, and the cutting head will move upward all the time.
2023-01-101.1K10After cutting, it is found that the graphics in the software and the actual graphics are reversed from left to right or up to down.
2023-01-091.1K106563F moves manually on the panel according to Z-axis, and the cutting head does not move.
2023-01-051.2K20The processing serial number arrangement is invalid.
2023-01-051.1K10
- データがありません
日本語
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski
