- Risolto
RDC6585G controller cutting head cannot be controlled
When debugging the RDC6585G controller, I found that the cutting head could not be controlled properly and there was no response no matter how it was operated. At the same time, the working indicator ...
- RDC6585G
- control system
- laser cutting
- RuiDa
- 2 utenti hanno risposto
219 - Risolto
RDC6585G controller set positioning point invalid
I encountered an issue with setting invalid positioning points while using the RDC6585G controller for device debugging. When I tried to set the positioning point through the control panel, no matter ...
- RDC6585G
- control system
- laser cutting
- RuiDa
- 2 utenti hanno risposto
237 - Risolto
RDC6585G controller constantly touches the pressure limit switch when turned on
When using the RDC6585G controller, the device always displays a collision warning with the pressure limit switch after each power on. Even if the power is turned off and restarted, the laser head con...
- RDC6585G
- control system
- RuiDa
- 2 utenti hanno risposto
261 - Risolto
Why does the RDC6585G control system keep moving after pressing a key once?
My device control system model is RDC6585G, and I encountered a problem. I pressed the directional keys once on the control panel, and the machine continued to move in the same direction, as if the ke...
- motion system
- RDC6585G
- control system
- laser cutting
- RuiDa
- 2 utenti hanno risposto
210 - Non risolto
How to install USB driver for RDC6585G controller?
My CO2 cutting machine uses the RDC6585G control system, how to install USB driver? We need detailed steps, thank you!
- USB
- RDC6585G
- control system
- CO₂ laser
- 1 utente ha risposto
288 - Non risolto
How to solve the problem of insufficient laser engraving depth in RDC6585G controller?
I operate a CO2 laser engraving machine for engraving, with the control system being RDC6585G. The light intensity and speed settings meet conventional requirements, and the engraved patterns and text...
- power supply
- beam delivery system
- RDC6585G
- laser engraving
- RuiDa
- 1 utente ha risposto
217 - Risolto
How to solve the abnormality of Z-axis of RDC6585G controller?
I have a CO2 cutting machine equipped with a Ruida controller, model RDC6585G. I encountered a strange phenomenon: when I press Z- or Z+ for a longer duration (about 3-4S), the Z-axis will keep moving...
- coordinate axis
- RDC6585G
- control system
- CO₂ laser
- RuiDa
- 2 utenti hanno risposto
255 - Risolto
RDC6585G: frame run works normally, but there is no response when pressing Start.
My CO2 laser cutting machine is equipped with a RDC6585G control system. I encountered a problem that I am at a loss for solutions. The machine moves along the frame normally, but there is no response...
- RDC6585G
- control system
- laser cutting
- RuiDa
- 3 utenti hanno risposto
293 - Non risolto
I am using the RDC6585G controller and the Err light is on, what should I do?
I am using the RDC6585G controller and the Err light is on, what should I do? Do I need to return it to the factory for repair? Is there any other solution?
- RDC6585G
- control system
- CO₂ laser
- RuiDa
- 1 utente ha risposto
227 - Risolto
The RDC6585G control system has weak laser output and cannot control the light
I have a CO2 laser cutting machine that is paired with the RDC6585G control system. When I operate it, the laser output is noticeably weak, and there is no response when trying to adjust the power or ...
- RDC6585G
- control system
- CO₂ laser
- laser cutting
- RuiDa
- 2 utenti hanno risposto
261 - Risolto
RDC6585G， Cut the square into parallelograms
I have a CO2 laser cutting machine that uses the RDC6585G control system. When I import files and cut square objects, the final result is a parallelogram, which is really frustrating. I have tried sev...
- coordinate axis
- RDC6585G
- CO₂ laser
- laser cutting
- RuiDa
- 3 utenti hanno risposto
257 Connection failure of CO2 laser cutting and engraving controller panel
If you encounter issues with the CO2 laser cutting and engraving control system, such as the mainboard being unusable or the panel connection not displaying, you can conduct an inspection as follows: ...
- RDC6585G
- RDC6442G
- RDC6685U
- RDC6445G
- RuiDa
Michael27200- Risolto
RDC6585G, Cutting inaccurate after replacing the vibrating knife
I use the RDC6585G vibrating blade cutting system, which was able to perform normal cutting before. However, after replacing the blade, the cutting accuracy decreased and the cutting path deviated fro...
- RDC6585G
- control system
- RuiDa
- 3 utenti hanno risposto
260 - Risolto
My RDC6585G control system displays scanned graphics in a tilted state
My cutting machine uses the Ruida system, RDC6585G， During the scanning process, the graphics were normal from the beginning, but gradually deviated as the scanning progressed, with the deviation angl...
- RDC6585G
- control system
- CO₂ laser
- laser cutting
- RuiDa
- 3 utenti hanno risposto
272 CO2 cutting and engraving system,laser engraving shows unevenness at the bottom,what should you do?
RDC6442G, RDC6445G, RDC6585G and other CO2 cutting and carving series control systems. If there is unevenness at the bottom of the carving, it can be adjusted according to the following methods. 1. C...
- RDC6585G
- RDC6442G
- RDC6445G
- laser engraving
- RuiDa
Gilbert30122
RDC6585G
20
Argomenti11
FollowerIn attesa di risposte
- RDworksV8可以加工锤子画吗？
- Where can I download the firmware upgrade file for the RDC6445 series controller?
- After installing the RDWorksV8 plugin in CorelDRAW, how can I do engraving and cutting at the same time?
- Edge tracing for contour cutting
- How do I adjust the time displayed on the C320？
- problema na cnc
- Mantisoft User guide or Manual
Copyright © 2021 Shenzhen Chanelink Network Technology Co., Ltd. All Rights Reserved.