The tool lift coordinate is set, but the tool is still lifted to the zero point coordinate during the cutting process.
2022-11-1754010Using V8 software, in user parameters, cutting parameters and idle acceleration are invalid after they are changed,how to solve?
2022-11-1746611In recent years, the application of laser cutting technology has developed very rapidly in China, and laser cutting equipment has formed large-scale production and application. But for the core high-end motion control system, many equipment manufacturers still rely on imported CNC systems.In order to break through the difficulties of foreig...
2022-11-2159900Principle of laser cleaningLaser cleaning is to use the characteristics of laser beam, such as large energy density, controllable direction and strong convergence ability, to destroy the binding force between pollutants and the matrix or to directly gasify pollutants to decontaminate, reduce the binding strength between pollutants and the matrix, a...
2022-11-2155900Laser light output control mainly uses GATE signal to control light output; The specific frequency, power and other parameters of the light output are controlled by PWM signal, mainly changing the frequency cycle and duty cycle in PWM.Duty cycle: the ratio of the time for holding high level in the output PWM signal to the time of the PWM cl...
2022-11-2160800At present, damage identification and location in remanufacturing is an artificial vision task. It takes time and effort. And may lead to inaccurate repair. In order to alleviate this problem, this paper proposes a vision based automatic damage location method, which integrates the camera into the robot laser cladding repair unit. Two case studies ...
2022-11-2144600The investment community learned that according to the 36 krypton news, recently the domestic comprehensive laser supplier Zhuo Radium Laser announced that it had completed a new round of financing of 200 million yuan, which was jointly invested by the SDB Manufacturing Industry Transformation and Upgrading Fund and SDIC Venture Capital. Potential ...
2022-11-2144700In order to better understand the development status of the automobile industry, deeply analyze the future development path of China's automobile industry, explore the technological innovation of the automobile industry in the new era, and show the latest technological achievements, on November 17, 2022, sponsored by OFweek, OFweek Electronic Engin...
2022-11-21461001、 Structure comparison of water cooling and air coolingAir cooling unit adopts air cooling mode (fan cooling); The water cooling unit adopts the cooling water cooling mode, and the water pump, cooling tower and circulating pipeline are used for circulating cooling of the unit.From the perspective of water cooling installation mode, it can be divi...
2022-11-1849700The operation of mechanical equipment will generate a lot of heat. In order to maintain the normal operation of the equipment, cooling measures must be taken. The current cooling system mainly includes water cooling and air cooling. In the field of laser marking, whether the equipment is cooled by water cooling or air cooling depends mainly on the ...
2022-11-1854900Water chiller is a kind of water cooling equipment, which provides constant temperature, constant flow and constant pressure. Its working principle is to inject a certain amount of water into the water tank in the chiller, cool the water through the chiller refrigeration system, and then transfer the low temperature cooling water to the equipment t...
2022-11-18566001、 The chiller does not start, and the indicator does not light up（1）The voltage is not normalCheck the power supply and confirm the three-phase balance（2） Fuse blownReplace fuse（3）Transformer burnt outReplace the transformer or change the power supply to three-phase four wire2、 The compressor runs continuously but the cooling capacity is i...
2022-11-1855300Laser cutting machines are generally divided into metal laser cutting machines and non-metal laser cutting machines. Non metal laser cutting machines mostly use CO2 lasers as generators, while metal laser cutting machines use fiber lasers as generators. Both types of cutting machines play an important role in industrial production, greatly improvin...
2022-11-1852600What are the characteristics of industrial chillersIn industrial production, the operation of the machine can not avoid the generation of heat. The industrial chiller is an indispensable cooling equipment. The industrial chiller generally has the following three characteristics.1、 Stable operation and strong performanceThe industrial chill...
2022-11-1854600The five most commonly used methods for frequency converter to control motor are as follows:The low-voltage universal frequency conversion output voltage is 380~650V, the output power is 0.75~400kW, and the working frequency is 0~400Hz. Its main circuit adopts AC-DC-AC circuit. Its control mode has experienced the following four generations....
2022-11-1845700
- No hay datos
Español
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski