When the capacitance is calibrated, it still moves downward when touching the metal plate.
Categorías:
Ruida
691
1
0
2022-12-05
C
Cyril
2022-12-06Cause analysis: ① Slag on the nozzle and other reasons make the amplifier unable to detect the collision plate. ② The metal plate has poor contact with the machine tool, so the amplifier cannot detect the collision plate. ③ The metal plate has a plastic protective film. Solution: ① Clean the nozzle and keep it clean. ② Ensure good contact between metal plate and machine tool. ③ Remove the plastic protective film.
0Responder
Recomendaciones relevantes
-
Problem with height sensor and Z axis
1 Respuesta2023-10-23 -
LightBurn and Ruida RDC8445S compatible?
1 Respuesta05-15 -
Ruida RDACC-Fiber-V2.0
4 Respuestas2024-04-10 -
Setting the cutting point is invalid.
1 Respuesta2022-12-21 - 2024-03-12