A three-phase asynchronous motor is a type of motor that relies on the simultaneous connection of a 380V three-phase AC power supply. Due to the fact that the rotating magnetic field of the rotor and stator of the three-phase asynchronous motor rotates in the same direction but at different speeds, there is a slip rate, so it is called a three-phas...
2024-04-1655810Which color is the best for laser coding?
2024-04-1655710What is the control technology for the acceleration and deceleration process of stepper motors?
2024-04-1560620In the field of glass processing, laser cutting technology has gradually become a new favorite in the industry due to its high precision, high efficiency, and environmental protection characteristics. Among numerous laser cutting technologies, ultraviolet laser cutting machines and infrared laser cutting machines have become the focus of the market...
2024-04-1559910Servo motors usually have a braking function, which generally refers to the electromagnetic mechanical holding brake device at the rear end of the servo motor. It is usually installed at the rear end of the motor and brakes the motor and locks the motor spindle through the brake pads acting on the motor spindle during operation.So the brake of th...
2024-04-1560310Servo motor wiring steps and methods:1. To determine the power cord and ground wire, servo motors usually need to receive power supply. Firstly, it is necessary to confirm the power requirements of the servo system and the wiring method of the power cord. Usually there are two power cords, one is the positive (+) and the other is the negative (-)....
2024-04-1357220Why does a stepper motor not require an encoder?
2024-04-1354520Can the gear transmission system eliminate travel errors through rotation?
2024-04-1363010Under what circumstances should the output power of the laser cutting machine be increased?
2024-04-12526101. Adjust the machine assembly to improve cutting efficiency.Guide rail: When installing the guide rail, it must be parallel. If the guide rail is not parallel, there will be resistance during the operation and development of the machine equipment. The workpiece designed by cutting will have serrated edges. Therefore, the Y-axis guide rail must ful...
2024-04-1256710If it is a machine, there will be losses, and the same goes for metal material laser cutting machines. In the long-term development and use process, we will definitely affect the existence of some more or less losses, such as slow cutting speed, poor cutting accuracy, and so on. Many people can think that it must be a decrease in laser power. In fa...
2024-04-1255110What is the acceleration and deceleration time set in the servo motor? What is its purpose?
2024-04-1163420The visual laser control system is a new type of CNC system that combines visual recognition technology and laser control technology. Its principle is to identify the processing object through visual technology, and control the laser control to precisely process the target by positioning the processing object. Compared with ordinary laser control s...
2024-04-1156210What should I do if the stepper motor loses its step?
2024-04-1163110A research team from the University of Alto in Finland has explored and implemented a new mechanism for laser operation. Through this mechanism, users can remotely control plasma nanolasers using a magnetic field.Previously, the only way was to "switch" plasma nanolasers through direct operation. However, with the development of topological photo...
2024-04-1057110
- No hay datos
Español
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski