I have an engraving color difference between the center of my design and the ends. Do you know what is it for?

Jamie

2023-08-24

319

1

0

Greetings! Probably a Newbie question but I did a Boolean Union to create a new image (worked great!) and then I performed lots of more edits/changes on other parts of my project. Now I want to go back and undo the Boolean Union temporarily so I could re-use a part of the original image. Then I will re-do the Boolean Union. I think I have way to to...

Nugent

2023-08-23

336

1

0

Hello everyone I’m having a problem and I need help today I installed my atomstack a5 pro+ machine and started running I set the x axis to 410 y axis to 400 from the lightburn application.I set the origin point to the front left. Then, when I start the machine, when the machine goes to the corners and sides, there is an incredible noise and v...

Miller

2023-08-22

337

1

0

Need help… I have a sculpfun s30 w10 Lazer and bought the camera attachment to it. I followed the set up video from sculpfun. I have a 400x400mm honeycomb but it is technically a bit smaller than a 400x400mm . I set up the distance of the camera at 350mm from the bed for the x axis. Centered the camera off cross hairs for the horizontal axis...

Darren

2023-08-22

278

1

0

Does anybody know of a way to rotate a polygon (or any shape) by a specific number of degrees?I’m designing a shape for a gothic cinquefoil arch (I’m actually going to be turning this into a tutorial) - I’ve completed the steps but I need to fit an octagan into a circle, pointing upwards. When you master a polygon in LB it points...

Tory

2023-08-21

358

1

0

Hello ,I use lightburn for quite some time , awesome piece of software.Although I like it and i use it very much , for the love of God and all the Angels in the heaven why is it so hard to put a lead in on the inside of a rectangle or other shapes. On circles is super easy , just put a negative angle , length and presto , inside lead in.On ...

Keegan

2023-08-21

419

1

0

have a k1 36 watt,power led bar registered full power when lightburn was set to 100%but now machine laser head output led bar is only showing 75-80 %

Marshall

2023-08-21

424

1

0

Laser chiller is one of the important accessories of laser equipment, its role is to cool the laser, so that the laser can work stably. However, if the laser water chiller leaks, it will cause great damage to the equipment, so when our laser water chiller leaks, we must find out the cause of the leakage and solve the leakage problem in time. Next, ...

Kevin

2023-08-21

375

1

0

Just a quick, simple question for this. I didn’t want to ruin it by experimenting to see what works best.I have to raise the laser on my D1 Pro 20w for it to go over the lip of this tray. Should I adjust the power and/or the speed to accommodate the lift?

Tory

2023-08-15

352

2

0

I have downloaded the trial version of the program.I followed the set-up instructions including the import file from XTool and the first video tutorial yesterday and got a cute little key ring.Then later went back to do some more work and computer would not work with software.Showed I was disconnected from the XTool D1 Pro.Even th...

Christian

2023-08-17

459

1

0

Hi, Can anyone give me a hint as what is going on here? for an unknown reason my gantry crashed in the top frame of my laser( Falcon 2 22w ) and since then it refuses to frame correctly it sometimes behaves like the laser frame is upside down ! or way over to the right! or over to the left, in frustration I reloaded my Prefs from previous save, no ...

Patrick

2023-08-17

301

1

0

Hello, I just upgrade my software to 1.4.01 and now my machine never ends a cut as get frozen on M2 command. The progress bar says busy and the timer keeps counting. If I press the stop button manually it doesn’t do anything and the machine is always on busy. I cannot move or home or anything. Does someone knows how can I solve this.

Liam

2023-08-17

292

1

0

With each discrete step that a stepper motor makes, the inertia of the system causes the motor to slightly overshoot (or undershoot) the intended step angle. The motor then oscillates, or “rings,” until it finally settles at the commanded position. If the frequency of these step-by-step oscillations is at or near the motor’s natur...

Jen

2023-08-17

286

1

0

Hello Everyone,First, I did conduct a search here and did not find an answer that solved my issue (wanted to make sure you knew that). :grinning:After switching from upper right origin to lower left origin in Device Settings, text is upside down and backwards and the Job Origin is not where I select it to be.Using Lightburn 1.4.01 on a Mac Studi...

Darren

2023-08-16

393

1

0

I’m a newbie to this software.Can I use a barcode scanner to read barcodes directly into Lightburn?I am not trying to create a barcode but read an existing barcode and put the characters in to Lightburn.

Cyril

2023-08-16

411

1

0