Hello, I'm upgrading an oscillating knife cutting machine. The machine had a Galileo controller. The PC used to operate it lost its hard drive. I couldn't configure the software from the backup I had.I purchased a Ruida RDD6616u controller from Wavetopsign on Aliexpress. I asked them for the installation manual and software on several occasions. I ...
πριν 2 μέρες2500The semiconductor laser subsystem can display power, current, temperature, pulse width, frequency, etc. through the LCD panel, and can be adjusted by the panel or remotely controlled by the RS232 serial port. The system has a high degree of integration and is easy to operate, and is mainly used in scientific research, system integration and other f...
πριν 4 μέρες3200I have 150W Chinese Laser machine, it is is fitted with Ruida RDC6445S(EC), it is double head laser machine. Head 1 is connected with CN-5 and Head 2 is connected with CN-6.I have issue since I received the machine, Head 1 is firing laser normally, but Head 2 does not fire, I have double checked all the setting in Ruida controller and RDWorks.Whe...
01-16870131LTH-aUV-40xFeature&BenefitTEC and air cooled, compact and easy to maintain;Long life, more than 10,000 hours;Output power: 10~40W;High stability during life;PWM or CW output.
06-1052001064nm TO5激光二极管 3W 激光传感器品牌:SEALAND型号：XL-TO5-E1064M-3W 应用：激光投影 仪器仪表 生物医学应用 全息术 光纤激光器 高速光电探测器 医疗器械和设备 宽范围光谱
06-095600LTH-aUV-406Feature&BenefitOptical output power up to 500mW;Wavelength 375nm~830nm;ESD protection, overtemperature protection and power feedback function;Can be modulated by external TTL and DAC signals;Wavelength, fan Angle, working distance, line width can be customized.
06-066900I am facing such a problem, my timing belt is OK, step length is also OK and I have installed a new timing belt, but I am facing such a problem in both x and y axes and the size of the larger side is 1.50mm and the smaller side is 1.20mm, there is a difference of 0.3mm and the original size should be 1.35mm for both, so now tell me what should I do...
06-0310321I want to use my device offline. I bought a samsung 64 Evo Plus sd card for this, but when I insert the card, I get the No Sd Card warning. What would be the reason. Sd card in exfat format.
2023-05-1165421BWT Thunder series fiber lasers have good beam quality, which makes them perfect choices for precision processing. The two operation modes, CW and modulation, minimize heat-affected zone. Reliable performance, modular and all-fiber design, and robust case enclosing all optical and electronic components ensure that they can be used under strict indu...
06-049101When using the brush function to rotate the Z-axis instead of the U-axis for machining, there is always a gap reset action，
05-2025840Including Q-switched nanosecond pulsed laser based on single oscillator scheme and picosecond and nanosecond laser based on traveling wave amplification scheme, which can realize infrared, green to ultraviolet laser output, suitable for glass, plastic, silicon wafer, PCB, ceramic marking, cutting and deep engraving applications of other materials....
05-2914400I am a novice, I tried to use an engraving machine to carve some patterns, but I found that the engraving machine did not carve in the correct direction of the pattern, but in the wrong direction. How can I change the setting? I use RDWorksV8 software
05-2730820BWT Lightning series fiber lasers have good beam quality, and the beam can be focused close to the diffraction limit, which makes them perfect choices for precision processing. The two operation modes, CW and modulation, minimize heat-affected zone. Reliable performance, modular and all-fiber design, and robust case enclosing all optical and electr...
05-2720900Buen día me pueden ayudar una máquina láser de 90cm x 60cm me sale en la máquina que el tamaño de trabajo es de 38cm x 30cm como puedo ponerla para 90x60
05-2627520
- Δεν υπάρχουν δεδομένα
Ελληνικά
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski