Hello I have a little problem. When I try to frame my project on Creality Falcon 2 it fails because every time it goes like left and down and the laser starts beeping. But when I use another PC it works completly fine. Does anyone know what the problem is?

Cruise Wang

2024-12-13

358

2

0

What is the reason for the jumping of the laser marking machine?Many people encounter jumping problems when using laser marking machines, which may be caused by the following factors:1. Machine malfunction: Long term non-stop operation of the laser marking machine during use can cause the equipment to overheat, thereby affecting its working effic...

Payson

2024-12-17

246

0

1

1. Check the power connection cableCarefully inspect all power connection wires of the krypton lamp, including plugs, sockets, and wiring, for any looseness, detachment, damage, or other issues. If the connecting wire is found to be loose, it needs to be re plugged tightly; If there is damage, a new connecting wire needs to be replaced.2. Check i...

Gilbert

2024-12-16

240

0

0

I would like to index a foil off a small spool using the rotary unit (repeating shape). Any ideas?

Silvano

2024-12-09

227

5

0

have a Creality Falcon2 22 watt laser. I am running the most current version of a licensed version of Lightburn on a Dell XPS with Windows 11. Everything was working fine yesterday but when I went to run a file from yesterday and a new one from today both frame and engrave upside down/backwards. I even went as far as to delete Lightburn and reinsta...

Roderick

2024-12-11

258

3

0

Hello. I jusy bought the new Creality rotary chuck to go with my Elegoo Phecda. I have the chuck plugged into the y axis cable. In lightburn, I have the rotary tool enabled, step set to what was provided in the manual, and measurements of the object. I also turned off the homing feature for my after market limit switches.The problem is that, when ...

Clarence

2024-01-16

212

2

0

The use environment of the cleaning machine leads to a weakened effect1. High or low ambient temperature: Laser cleaning machines are generally suitable for ambient temperatures between 5 ℃ and 35 ℃. If the ambient temperature is too high or too low, it will affect the normal operation of the laser cleaning machine, resulting in a weakened cleaning...

Abel

2024-12-13

224

0

0

Reasons for laser weld indentation problemDuring the laser welding process, the welding area is subjected to high temperatures, which can cause deformation due to thermal expansion and contraction, resulting in a concave weld seam. In addition, the selection of welding materials and welding parameters can also affect the occurrence of weld indentat...

Marshall

2024-12-12

228

1

0

Reasons for the appearance of color in laser welding seamsDuring laser welding, if the welding parameters are not appropriate, it often leads to the appearance of color in the weld seam. This problem mainly occurs on high reflective materials such as stainless steel, aluminum alloys, and titanium alloys. After analysis, in addition to inappropriate...

Tory

2024-12-11

220

0

0

I’ve had my laser for A. Bout. And the horizontal lines are starting to bump or drag. I have to keep this fresh and people’s minds because.

Roderick

2024-12-10

189

1

0

When choosing a laser cleaning machine, to ensure the selection of suitable equipment, users need to pay attention to and confirm the following key parameters:1、 Laser powerLaser power is an important factor affecting the cleaning effect and speed. Generally speaking, the higher the power, the better the cleaning effect and the faster the speed. ...

Christian

2024-12-10

308

0

0

Handheld laser welding machines, as an important tool in modern welding technology, have been widely used in various industries due to their high efficiency, precision, and flexibility. However, correct operating techniques and safety precautions are key to ensuring welding quality and operator safety. This article will provide a detailed introduct...

Smith

2024-12-09

215

0

0

Recently, when I try to engrave using my Xtool D1 pro, the engraving is way off. When I frame the job, everything looks fine. But once I start to engrave, the laser moves roughly 1.5 inches to the left. This has happened consistently over the last month. I’ve managed the engraving by manually adjusting the starting point of the laser.Today, I trie...

Tim Johnson

2024-12-06

182

2

0

1、 Motor burnt outOne of the common faults of brushless DC motors is motor burnout. Possible reasons include overvoltage, overload, overheating, etc. If the motor is found to be burnt out, it is necessary to replace the motor and check whether the relevant circuits are working properly.2、 Controller malfunctionThe controller is a very important c...

roy

2024-12-07

229

1

0

The laser stops firing in the meddle of the job but the head doesn’t stops. When that happens, the head eventually stops, moves back and tries to keep engraving where it stops. The problem with that is that when that happens it never restart in the same position, making a really noticeable line along the path. That line is just shifted from the “or...

Jack Wilborn

2024-12-07

219

1

0