chanelink logo
CHANELINK
English

Raycus 50W red laser

Categories:
Λέιζερ
Tags:
765
1
See translation
2023-02-24

I have a 50W Raycus fiber marking and i noticed that when the red laser is showing the engraving area it goes out of focus in relation to or focus of the fiber laser. For example: if I use a 110x110mm f-theta, the red laser focus is around 12mm above the fiber laser focus, which makes the red line thicker. I don’t know how to solve because unlike the 30W, the Raycus 50W comes with the red laser inside the sourcer.
C

    • Abel

      2023-02-27
      Because you have changed the lens with different working planes, your focus position has also changed. Suppose your 200200 lens focus position is 20, then if you change to a 9090 lens, your lens will become smaller at 10 , so be sure to re-adjust the focus, otherwise the situation you said will appear
        See translation
        Reply
      Relevant recommendations
      Collect
      Report