chanelink logo
CHANELINK
English

How to lock Ruida 6445G controller with password on startup?

Categories:
Ruida
Tags:
689
3
See translation
08-18

Hello everyone,

I am using a Ruida 6445G controller for my laser machine and I would like to know if it is possible to lock the machine (or the keyboard panel) with a password.

My goal is: when the machine is powered on, the user must enter a password first before being able to control the machine.

I tried setting up the password feature, but every time I restart the machine, the password and the settings reset back to default.

Is there a way to make the password lock permanent, so it always requires login after power on? Or is this not supported by the 6445G?

Thanks in advance for your help!
C

    • blue sea

      08-19
      Hello, you can lock the panel by using the keyboard lock function in the panel menu bar, and you need to input the password to return to normal operation. The control card can control the use time by setting the authorization date limit through software, and the authorization setting can be set through software password setting.
        See translation
        Reply
        • CBE1A5C7

          : Can you please tell me which software we can do it? It RDWork 8? I’m try to lock a panel from the machine already but when we power off and power on back the settings and lock panel will be gone user can control without enter the password. Thanks.

        • blue sea
          Reply
          @CBE1A5C7

          : Yes, the panel keyboard lock function can be set according to the instructions in the control card manual when used with the RDWorksV8 software.

      Relevant recommendations
      Collect
      Report