RDC6563F

ROD

Categories:

Ruida

Tags:

none

Published: Nov 2th 2023

Hi,

My machine has a rdc6563f controller an i use rdcutist 3

I have worked out most issues but i cannot find how to continiue a cut after a collision.

If i have a part stand up and the laser head touchs it , the machine stops and an alarm is then on the screen(collision).It asks to press esc to clear.I clear the alarm and when I then press start it does nothing.

The only way i can get it to move is to completley reset the machine.

Do you know the process to continiue the cutting without a total restart/reset?

Rod

blue sea

Nov 2

Hello! When a collision occurs, press the [←] button on the panel to clear all alarm records. If the collision alarm is enabled, the cutting head will be automatically raised to a safe height if it hits the plate during movement. After resetting, the processing can be continued, and if the capacitance value is incorrect, the capacitance can be recalibrated.

0 Replies

Jimmy-He

Nov 2

Please read the version and take a photo and send it to us

View the picture

0 Replies

RDC6563F

CCD software camera parameter debugging

The panel did not prompt for hard limit protection when Z-axis reached the hard limit switch.

CCD software edits the features of large pictures, which can not be spliced into the features of a phenomenon graph.

Prompt "The machine has been protected" after starting the point

Using V8 software, in user parameters, cutting parameters and idle acceleration are invalid after they are changed,how to solve?