繁体中文

Latest breakthrough! 3500W free output blue semiconductor laser

488
2024-09-03 13:51:31
查看翻譯

The 3500W free output blue semiconductor laser beam is output in a free space manner, with a rectangular spot directly acting on the material surface without the need for fiber optics or laser processing heads. This laser has a wavelength of 455 ± 10nm, with continuously adjustable power and a maximum output power of over 3500W. It is mainly used for non-ferrous metal cladding, quenching, etc., to greatly improve processing efficiency and quality.

Figure 1: 3500W Free Output Blue Light Semiconductor Laser Cladding Sample

Experiment 1


Figure 2 (a-e) OM images of a single layer at different powers; (f) Geometric dimensions; (g) Fusion efficiency; (h) Comparison of fusion efficiency and other research results; (i) Schematic diagram of high-power infrared laser and (j) high-power blue laser processing

The Institute of Special Materials at Shanghai Jiao Tong University developed a 3500W, rectangular spot (7.5 mm2) blue laser additive manufacturing equipment based on Guangdong Institute of Hard Science and Technology and Zhuo Jie Laser. Using directional energy deposition technology, pure copper was successfully deposited on Inconel 718 chromium nickel iron alloy substrate, achieving a cladding efficiency of 62.84 mm2/s.

——Achieving ultra-high efficiency in directed energy deposition of pure copper on Inconel 718 substrate with a 3500 W blue laser,Materials Letters,Volume 372,2024.

Experiment 2

Figure 3 (a) B-LMD process (b) B-LMD process schematic diagram

 



Figure 4 (c) Comparison of tensile properties between B-LMD pure copper and other additive manufactured pure copper

The New Materials Research Institute of Guangdong Academy of Sciences, based on the 3500W, rectangular spot (7.5 mm2) blue laser additive manufacturing equipment developed by Guangdong Institute of Science and Technology and Zhuojie Laser, successfully deposited pure copper material on 316L stainless steel substrate through laser metal deposition process, with a density of 97.9%, tensile strength of 244 ± 9 MPa, yield strength of 158 ± 6MPa, all of which are the highest reported values so far. The elongation at break can reach 14.7 ± 0.8%, and the comprehensive performance is better than that of pure copper samples prepared by SLM and MEAM processes.

——Comprehensive study of microstructural evolution and strengthening mechanism of high-performance pure copper prepared by blue laser metal deposition (B-LMD), Materials Science and Engineering: A.

Source: KCTII Institute of Technology

相關推薦
  • New laser technology unlocks deuterium release in aluminum layers

    In a recent study, quadrupole mass spectrometry was used to measure the number of deuterium atoms in the aluminum layer.A recent study led by the National Institute of Laser, Plasma, and Radiation Physics and Sasa Alexandra Yehia Alexe from the University of Bucharest explored the details of laser induced ablation and laser induced desorption techniques using a 1053 nm laser source. The study was ...

    2023-11-25
    查看翻譯
  • Nat. Commun.: Two color orthogonal polarized organic light-emitting diode

    In recent years, linearly polarized organic light-emitting diodes have greatly enriched the application scenarios of polarization optics and optoelectronics industries. The low-cost and large-area preparation of linearly polarized organic light-emitting diodes with high polarization, strong directional emission, narrow bandwidth, and multi-color adjustability is an important challenge in the curre...

    2024-02-29
    查看翻譯
  • Narrow band tunable terahertz lasers may change material research and technology

    A group of researchers from the Max Planck Institute for Material Structure and Dynamics in Germany explored the effect of manipulating the properties of quantum materials far from equilibrium through customized laser drivers. They found a more effective method to create previously observed metastable superconducting states in fullerene based materials using lasers.By tuning the light source to 10...

    2023-11-21
    查看翻譯
  • SILICON AUSTRIA LABS and EV GROUP Strengthen Cooperation in Optical Technology Research

    EV Group, a leading supplier of wafer bonding and lithography equipment for the MEMS, nanotechnology, and semiconductor markets, and Silicon Austria Labs, a leading electronic systems research center in Austria, announced that SAL has received and installed multiple EVG lithography and photoresist processing systems in its MicroFab at the R&D cleanroom facility in Filach, Austria.These devices...

    2023-11-15
    查看翻譯
  • Nature Photonics | New Comb Laser Assists Stable and Efficient Generation of Multi wavelength Signals

    Recently, researchers have developed a comb laser with higher stability and efficiency. The use of synthetic reflection self injection locking micro comb design enables the laser to achieve stability and increase conversion efficiency by more than 15 times. This efficient, stable, and easy to manufacture design is expected to make rapid progress in fields such as portable sensors, autonomous navig...

    2024-03-02
    查看翻譯