chanelink logo
CHANELINK
繁体中文

Scientists build high-power cladding-pumped Raman fiber laser in 1.2 μm band

452
2024-01-31 13:58:14
查看翻譯

Laser sources operating in the 1.2 μm band have some unique applications in photodynamic therapy, biomedical diagnostics, and oxygen sensing. In addition, they can be used as pump sources for mid-infrared optical parameter generation and visible light generation through frequency doubling.

Laser generation in the 1.2 μm band has been achieved by different solid-state lasers, including semiconductor lasers, diamond Raman lasers, and fiber lasers. Among these three types, fiber lasers are an excellent choice for generating 1.2 μm band lasers due to their simple structure, good beam quality, and flexible operation.

Researchers led by Professor Pu Zhou from the National University of Defense Technology in China are interested in high-power fiber lasers in the 1.2μm band. Most of the current high-power fiber lasers are ytterbium-doped fiber lasers in the 1 μm band, and the maximum output of the 1.2 μm band is limited to 10 watts.

Their research, titled "High-Power Tunable Raman Fiber Laser in the 1.2 μm Band," was published in Frontiers in Optoelectronics.

Their idea is to use the stimulated Raman scattering effect in passive optical fibers to obtain high-power laser generation in the 1.2μm band. The stimulated Raman scattering effect is a third-order nonlinear effect that converts photons to longer wavelengths.

By exploiting the stimulated Raman scattering effect in phosphorus-doped optical fiber, the researchers converted the high-power ytterbium-doped fiber in the 1 μm band to the 1.2 μm band. A Raman signal with a power of 735.8 W was obtained at 1252.7 nm, which is the highest output power ever reported for a 1.2 μm band fiber laser.

Source: Laser Network


相關推薦

  • Scientists use tiny nitrogen defects in the atomic structure of diamonds as "color centers" to write data for storage

    Scientists at the City University of New York use tiny nitrogen defects in the atomic structure of diamonds as "color centers" to write data for storage. This technology is published in the journal Nature Nanotechnology and allows for encoding multiple bytes of data into the same nitrogen defect at multiple optical frequencies, without confusing the information content.The common laser based techn...

    2023-12-07
    查看翻譯

  • High Resolution Visible Light Imaging of Large Aperture Telescopes

    The deformable mirror used in adaptive optics can instantly correct the static wavefront aberrations and atmospheric turbulence wavefront disturbances of the optical system by changing its surface. This enables the optical system to automatically adapt to changes in the environment and maintain optimal performance. It is widely used in high-resolution astronomical observations, laser atmospheric t...

    2023-10-31
    查看翻譯

  • Composite two-dimensional materials for fiber lasers demonstrate the prospects of ultra fast optical applications

    The formation of dissipative solitons is influenced by various factors, such as spectral filtering effect and Kerr nonlinearity effect. This interaction leads to the possibility of mode locking on a large range of parameters, generating pulses with completely different types and evolution from conventional physical laws and optical properties, tolerating higher nonlinear effects, and effectively a...

    2023-09-21
    查看翻譯

  • The United States is expected to use "AI+lasers" to deal with space debris in the future

    Due to the increasing threat of space debris in low Earth orbit around the Earth, space agencies around the world are becoming increasingly concerned about this. According to a new study funded by the National Aeronautics and Space Administration (NASA), it may be possible to send space debris that may be at risk of colliding with orbiting spacecraft to safer orbits through a laser network deploye...

    2023-10-20
    查看翻譯

  • Stratasys announces Q3 2024 financial report, with a net loss of $26.6 million

    Stratasys (Nasdaq: SSYS) has announced its earnings for the third quarter of 2024, indicating a bright future for the company. The company is increasing profits and gross margins by cutting costs and focusing more on rapidly growing industries such as aerospace, automotive, defense, medical equipment, and dentistry. CEO Yoav Zeif shared that the new F3300 3D printer has performed well in the marke...

    2024-11-15
    查看翻譯