I’m working on a guitar fretboard. Usually the fret dots go in the middle of the fret board, which is easy to figure out in lightburn. But for this particular board I want the fret dots to be dead center on the left half between the edge of the fretboard and the center line. And also dead center between the two frets. Any ideas?

Williams

2023-06-05

419

1

0

What is causing this?Grbl 1.1f [‘$’ for help][MSG:‘$H’|‘$X’ to unlock]$X[MSG:Caution: Unlocked]okWaiting for connection…ok[VER:1.1f.20180715:][OPT:VMZ,35,254]Target buffer size foundokHomingok<Idle|WPos:0.000,0.000,0.000|FS:0,0|WCO:0.000,0.000,0.000>okStarting streamALARM:2G-code motion target exceed...

Smith

2023-06-05

355

1

0

hi there , i did stupid thing and tried to upgrade my Ortur 2 S2 laser firmware and now it wont turn on.when i press power and reset button it comes up on my computer to put firmware in but when i turn that off it wont power up.ive started Lightburn and did this to see if Lightburn would see the laser but it says it isnt conectedcan i please get so...

Miller

2023-06-05

399

1

0

Hullo peoples lovely to meet you all!I’m a retired architect and set designer and I’m turning my design and fabrication skills to making 1:24 scale miniatures.I’m used to laying out pieces for cutting on a table saw where I try to make it so individual pieces share a cutting line to reduce waste.Is that not possible with laser cut...

Darren

2023-06-05

468

1

0

I have tried resetting the default layout, changing my tool bar size and font sizes but am unable to get Art Library to go into the tabs where Cuts, Move and Console are located. Have tried adjusting the display resolution (1366 x 768), but to no avail. My HP laptop is about 3-4 years old.What I want to accomplish is to have Laser and Library on th...

Cyril

2023-06-05

294

1

0

Is there a way to change the preferences so Lightburn will look for svg files instead of Lightburn files. Most of my files are svgs and I’m slowly converting them over but every time I go to open a file, it automatically is looking for lightburn files. I have to drop down the choices and tell it to look for all supported files. I’d like...

Gilbert

2023-06-05

341

1

0

Humanetics Biomed, the prominent industrial technology group, has made significant progress in expanding its outsourced manufacturing capabilities into new markets. With a 50-year history of providing high quality strain sensors, material processing, laser microprocessing, fiber optic processing and fiber optics, Humanetics Biomed has firmly establ...

Nugent

2023-06-02

286

1

0

NUBURU, a specialist in high-power and high-brightness industrial blue laser technology, announced that it has delivered a number of units to Essentium. NUBURU and Essentium jointly announced a multi-year, multi-million dollar agreement in May 2022 to develop and manufacture blue laser-based 3D printing platforms.The delivery already announced ma...

Christian

2023-06-02

346

1

0

Two startups working on a laser-powered fusion energy approach have won significant financial backing in a funding round just announced by the US Department of DOE.Xcimer Energy, based in California, and Focused Energy, a U.S.-German joint venture with a base in Texas, are among eight companies sharing $46 million aimed at helping achieve p...

Patrick

2023-06-02

396

1

0

Good morningI have connected 2 lasers to a USB hub, but now they do not respond.is this possible or is the new hub brokenwould love to hear from you

jessie

2023-06-02

468

1

0

Just ordered the Creality Falcon 2 40W laser. What version of Lightburn do I need to connect to it? I do not know the type of controller inside it. I assume the exiting Falcon 2’s with 22W use the same software. Any advice will be greatly appreciated.

roy

2023-06-02

450

1

0

Been working on finding the best setting to cut 1/4 in Basswood and settled on 100 speed and 60% power with 2 passes. The program will burn each color coded areas twice before moving on to the next area which is good with the exception of the smaller areas which can be over burned. What is the best way to burn the same color tool paths completely o...

Liam

2023-06-02

369

1

0

Hello!I updated my LightBurn, but now when I try to Import files onto the workspace, it crashes immediately.Any thoughts?

Jen

2023-06-02

382

1

0

So, I purchased the Atomstack P9M50 today! Will the LightBurn software automatically update to the new system, or will I have to reset LightBurn?

John Trant

2023-06-02

396

1

0

I have the OmTech Polar and it seems the exhaust fan is controlled by the air assist setting. Is there a way to change this? I would like the exhaust fan to run anytime the laser is working, and not be tied to the air assist setting.

Robert Evans

2023-06-02

402

2

0