I have imported an image which is the template I have to draw according to.Every time I use “Edit nodes” and click on one of my shapes, it is the layer with the image that becomes active.Is there a solution to my problem?
2023-09-1598410Hi,I keep having issues with limits. (XTool D1). I’m using start from current position on a cut that looks fine in the grid and also frames with no issues.Then I cut and it hits limits and the job hard crashes.I have to be using current position as I’m aligning material precisely and have things holding it in place that would be difficu...
2023-09-1595010This is my first laser - I really appreciate the support here. I have things aligned pretty well in x,y,z - but the beam isn’t quite centered in the cutting head - I have the lens/nozzle removed and just firing down onto a piece of tape stuck to where the nozzle usually screws on.I can modify the mirror bracket for the 2nd mirror to f...
2023-09-1499910Trying to add a name to a design. Go to weld or boloean name to design and the name disappears. Any ideas?After Weld
2023-09-1492610Is there any way in LB to turn on/off output for only some of the objects in a given setup like i have here since they are in the same layer or layers? In my current set up im still dialing in my settings and don’t want to run all 4 of these each time I run a test. Is there a way to only run 1 of them since they are in the same layers?OR if ...
2023-09-1477910Static droplet array (SDA) is a necessary and indispensable tool for high-capacity screening testing or determination of specific cells or analytes (whose chemical components are substances that identify targets) for identification and targeting. However, extracting and collecting target droplets containing unique analytes or cells from SDA remains...
2023-09-1488410In order to develop photon like brain computing technology, a research team at Strathclyde University integrated spike based neural networks with semiconductor lasers that display the behavior of spike neurons.They demonstrated high-performance photon spike neural network operations and lower training requirements, and initiated a novel training sc...
2023-09-1479610Disclaimer: this seems to be a hardware issue as behavior is identical with Lighburn and EZCAD2I recently acquired an OMTech 50W Raycus machine with a seemingly genuine BJJCZ controller.The machine connects. The galvo head is operational. The RED LED from the laser source functions (no way for me to toggle it, it’s always on). LED1 on the BJ...
2023-09-131.1K11Hi, a few months ago I decided to clean the lenses on my sculpfun s10, because i saw that i had to lower the speed in order to cut wood. Since then i struggled a lot to cut everything. I tried reinstalling lightburn, fixing the S-max value and changing motherboard. Even after all of this at 200mm/min 95% i can only cut paper and slightly engrave wo...
2023-09-131K10How to import a font e.g. The Times
2023-09-1379410StenTech® Inc., a leading multinational SMT printing solutions company, is pleased to announce the installation of a new, state-of-the-art laser system at its facility in Guadalajara, Mexico.This investment in the latest StencilLaser G6080, manufactured by LPKF Laser & Electronics in Germany, marks an important milestone for the SMT...
2023-09-1390410Wayne Tupoula, CEO of Laser Photonics, commented, "Our DefenseTech and CleanTech lines are ideal for rougher, cleaning, finishing, pre - and post-weld applications, which is why we are looking forward to showcasing them at this year's event."The DefenseTech range uses laser cleaning and laser marking technology and is designed to meet the needs o...
2023-09-131K10I like and understand layer names in settings or global for current and future projects.However, is there a way to have local layers only?For example, I cut between 1-5mm thick material. I like the idea of setting layer 05 to the settings I need for 1.5 mm material, which I use most often. But when I use 5 mm material, I need to change 05 to a slow...
2023-09-121.1K10I have a project that has 100 little circles that are all the same size, but not in a straight line pattern. Is there any way to change the size of all the dots without having to do each one individually?
2023-09-121.1K10My text is always mirrored when I engrave something.Can somebody tell me how to fix it?
2023-09-121.3K10
- 暫無數據
繁体中文
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski