Is it possible to create a macro switch that can be turned on ans assign the switch to park the laser head up and out of the way of where it just finished?This is related to a previous post about me making small 50x50mm round engravings and swapping new ones in.This would be useful for a LOT of things I do.I know with my 3d printer / CURA i can add...
2023-11-0639710I have a 100watt mopa Galvo and its not filling all shapes individually on some designs I noticed this when I traced an image in lightburn and set it to fill individually It still would fill the entire thing at once, I have already tried ungrouping the shapes and still no luck. On version 1.4.03 running on a M1 Max.
2023-11-0634410Hi everyone, I have short question to those who know better than me: Is the light coming out of a laser engraver enclosure safe?What I mean exactly: There are ports for air to come in that can be opened up on the sides of the enclosure, where then blue light comes out from the diode laser. But it is by no means direct. Would that blue light still ...
2023-11-0644810When I frame a project, the laser comes on frames then shuts off. I’m guessing it’s a setting, but on black or dark projects it leaves a line.Thanks in advance.
2023-11-0338310anyone know where I can find the rear minus front command
2023-11-0336920It works fine with Laser GRBL but not with LB. Can’t find the Com Port. Again, Com 3 on GRBL and no issue - instant connection.
2023-11-0338310can anyone tell me how to change the start point of a cut on a dxf file imported to lightburn on the laser?
2023-11-0341910Hello.Is there an option to show/hide the icon of the “Set Laser Position”?Everyhting is fine (sort of say), but when I click in the workspace does not show the small icon where the laser is located.
2023-11-0238830Lightburn is not recognizing the console, although I´ve tried several times and several drivers…So my next step in Lightburn, was to install the console manually…One config is a GRBL normal, and the other is a GRBL M3 type…I made 2 engravisngs…One normal, and one M3 type…Same config, even turning on constant...
2023-11-0240510I was working on a simple tutorial to help someone that had 3 elements they wanted to engrave and then have a contoured cut line but using offset instead created 3 separate lines because the items were too far apart.Well I have a fix for this but just keep making the offset larger until it does join then select the offset and offset this inward un...
2023-11-0240510The research team led by the University of Cambridge has developed a method that allows structural modifications to be "programmed" into metal alloys during 3D printing, thereby fine-tuning their performance without the need for thousands of years of "heating and refining" processes.The new 3D printing method combines the best quality of tw...
2023-11-0146410I can’t view my files in lightburn, Once I open the file… there’s no data open in lightburn workspace.
2023-11-0135110I have one copy of Lightburn on a desktop PC, where I do design work, and a second copy on a PC laptop, which I use to control my OLM2. When I transfer files from one computer to the other, whether by email or thumb drive, everything remains the same, except cut speed. That changes by a factor of 60: cut speeds of 1000 on the desktop are transforme...
2023-11-0140710Hello Guys,i’am new in the laser business and i’m trying to connect my Two Trees TTS-55 with the Lighburn Software, but it is’nt successful.I’m getting this out of the console, but i don’t know what that means:Waiting for connection…Waiting for connection…Waiting for connection…[MSG:Local access...
2023-10-3145110I’m trying to figure out how to control when layers/groups get printed. In particular my logo is being printed one group after another and therefore there is “enormous” whitespace waste. I know I can adjust the whitespace jog, but it would be so much faster if it would print it raster-wise one line at a time. I’ve tried weld...
2023-10-3136210
- 暫無數據
繁体中文
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski