Okay, I’d like to resize these texts into same width or height. I tried to use the encircled tools. It does the job but does not apply the lock aspect ratio which makes most of the text condensed or wide. Anyone please help me.

Liam

2023-11-29

715

1

0

Perovskite solar cells are solar cells that use perovskite type organic metal halide semiconductors as absorbing materials. They belong to the third generation of solar cells and are also known as new concept solar cells.operational principlePerovskite solar cells are solar cells that use perovskite type organic metal halide semiconductors as abs...

Patrick

2023-11-28

955

1

0

Having an issue with slots. On a drawing with several slots, all 3mm, only a few actually appear to be editable.I’ve checked there are no extra nodes or rounded corners in the drawing. The drawing seems to be closed as I only see one green node. No errors are present in the dialog box.

Christian

2023-11-28

745

1

0

I was using the same speed and the same power, but then it slows down a lot, but i dont know the reason, what reason can it be?I was using my laser cut machine to cut the polywood in 3mm and with the suggested speed power and pass, but then the machine just no more able to cut it through as from the beginningfor my laser the suggested speed is 350,...

Nugent

2023-11-28

710

1

0

I intend to cut two lines to transform the two areas into one. When I do “trim line” the line n stays in one. Then it creates open part problems. Does anyone know a way to not have to see each zone to manually join these points that don’t stay together?

Vasili

2023-11-28

748

1

0

Although it may be used to cut a wide range of materials with accuracy and versatility, laser cutting has several risks that should be considered before using it regularly. Certain steps need to be taken to guarantee both safety and the best possible outcomes. General safety measures for maintaining laser cuttings include the following:1. Put on ...

Terrelle

2023-11-27

749

1

0

Buen día, ¿alguien podría ayudarme para corregir o saber porque pasa esto? Agradezco de antemano su atención

Clarence

2023-11-27

789

1

0

I would like to buy a new notebook. What are the minimum system requirements for LightBurn to work properly (storage space, graphics card, etc.).I will also work with CORELDraw Graphics Suite 2023. I think if I stick to these requirements, LightBurn should also work perfectly.

Gilbert

2023-11-27

752

1

0

Have tried the Lightburn material test with 2 different lasers but operated with the same laptop. When running the test pattern, the line speed will change but the fill speed seems to remain the same. Seeing very little if any change in the fill rates.Tried on a 2 year old Ortur Lm2 10w and a fairly new Xtool d1 pro 20w.1st was set at 20 to 100 % &...

Darren

2023-11-25

841

1

0

I am simply trying to turn my Atezr L2 24w machine on, set it up, and get going! Every time I turn it on, it immediately starts beeping saying a flame detected. I have tried rechecking everything over and over and am at a loss. I can’t get started on anything and very frustrated. The I seem to have everything setup correctly, have looked at h...

Miller

2023-11-25

813

1

0

I had to format by computer , i am now reinstalling all of softwares i need including LBthanks God i made a copy of my previous machine setting file and i dragged and dropped it in to working area and LB seems ok.i imported it twice by mistake and now i have also a undesired copy (3) of my own machine settingPoint is that by default any time i ope...

Smith

2023-11-25

833

1

0

What is the sign for the servo to return to the origin? For example, there is a home button ->press the button ->the servo starts returning to the home point ->touch the home sensor (sensor closed) ->the servo starts decelerating ->the home sensor is disconnected (zero return completed)How to determine the completion of zeroing in t...

Aaron

2023-11-24

826

1

0

I remember to use a front and rear limit and a near origin for relative positions.Is it better to use absolute position or relative position for turntable servo? The turntable needs to be stuck once every time it passes through a workstation. What control method can be used to minimize the cumulative error as much as possible! And prevent the servo...

Kevin

2023-11-24

742

1

0

I have a template file that I got online by someone else.This is similar to the LightBurn’s Test Material option, but a bit more in depth.This is apparently done with multi mode (sub layers), but I cannot figure where the settings are configured (increment of power).All CO2 (red) layer is 2400 speed, okay. But how to set the 10% increment in...

Marshall

2023-11-24

834

1

0

When I try to engrave a simple word, the job aborts and I get an error in the console about a line in the GRBL code needing to be an integer:I tried a new USB cable but it still happens.

Keegan

2023-11-24

820

1

0