Water is a good cooling medium, but all kinds of water contains dissolved solids, gases and various suspended substances to varying degrees, in the water cooling system will cause such as sediment (scale, silt, corrosion products and biological sediments), corrosion, microbial (bacteria, algae) propagation and other problems, to the safe and effici...
2023-04-0491700Gear is one of the commonly used parts in mechanical transmission. It is a device that transmits power and motion through the meshing relationship between the rack and gear. A gear usually consists of a group of meshing gears and shafts. The number and shape of the gear teeth are different, which can achieve different transmission ratios and transm...
2023-04-0499800Hi there,I wanted to share the gradient charts i’ve created, because i find them extremely useful. They are set to be done on an A4-sized material (297x210mm) but you can of course resize them as you wish.You will find all charts in Lightburn format herebelow.Speed and Power values should be ok with most of the recent machines, like X-tool, ...
2023-04-0187020Imported an image into LB file many weeks/months ago, how can I find out what the original image was when imported? Want to make some adjustments to img, but can’t find. Possible or not?
2023-04-0396910I have a Creality Falcon, when I use a TF card Frame will show the laser and where it’s going to work, however when I plug it into my computer Lightburn does not show the laser while doing a Frame. I have the laser turned on while framing on and the fire button is also on. Am I missing something?
2023-04-0398610I’ve just installed it, the device is connected as can be seen from the highlighted line in the terminal in the screenshot, but nothing shows up. I’ve added myself to dialout and tty, as per these instructions but it just doesn’t work.What am I missing?
2023-04-031.1K10I have seen several posts stating that you can use the number keypad to position the laser. My problem is that my computer is a laptop and doesn’t have a number keypad. Any ideas of a workaround?
2023-04-0195410I have lost color palate at bottom of page> Blockquote
2023-04-011.1K10In my design it looks good in the program but preview only shows bottom half of the words?Any idea why?
2023-04-011K10If I double click the LightBurn icon the software opens in nonfull screen. I need to click the full screen box two more times to have it open full screen . Is this a windows setting or a setting in LightBurn?
2023-04-011.1K10I have Atomstack S10 Pro and when I press the Show laser position button, the laser should light up, is that correct? Before that I enabled from settings “enable laser fire button”. This function does not work for me. Am I doing anything wrong?
2023-04-0197610When I turn on my Atomstack X30 the jog controls in Lightburn do not work, and, when I hit home, it noisily move to the left of the x axis and keeps pounding away on the edge of the y axis without stopping
2023-04-011.1K10Hi all.I am trying to adjust slots/tabs but don’t see an option to adjust the end tabs. See image. Is there a way to do this through slot tab resizer?Thank you
2023-04-0196910Hello guyshow can i swap axis locations in Lightburn?I have an Atomstack S10 Pro + ExtensionMy desktop looks 410x850 I want to see 850x410.This will be much more convenient for me to work with
2023-03-311K10Is the “Focus Z” controller-specific funbction?I use at Cohesion3CD controler, and the bottum does not seeam to do anything.Is it beasuse the function is specific to the controller?
2023-03-3191910
- 暫無數據
繁体中文
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski