chanelink logo
CHANELINK
简体中文

HGTECH Laser's New Product Debuts at the 2025 Munich Shanghai Light Expo

1006
2025-03-07 16:26:05
查看翻译

New Product for Wafer Testing Probe Card Manufacturing Equipment Project

 


This project adopts vision guided laser precision cutting to separate the probe from the crystal disk, and then generate a product mapping image for use in the next process. When picking up the probe, multi-point reference surface fitting technology is used to achieve non-contact probe suction and avoid force deformation. After picking up the probe, posture correction technology is used to ensure that the probe is implanted into the fixture. Probe crystal disk size 8 ", thickness>20 μ m, cutting accuracy<10 μ m, heat affected zone<30 μ m, correction accuracy<2 μ m, implantation accuracy<10 μ m, welding accuracy XY<3 μ m, Z<8μm， Weld the maximum plate of 12 inches.

application area 
Electronic/Electrical/Semiconductor


New intelligent equipment for comprehensive printing and marking


The comprehensive printing and marking intelligent equipment is particularly suitable for the field of shipbuilding. Based on the assembly line method, it uses UV coding technology, combined with full format automatic 2D visual edge finding technology, under the control of MES system, and combined with dedicated control and programming conversion software, to achieve efficient printing of various display elements on steel plates in shipbuilding. The maximum printing width of the equipment is 5.5m, which can meet the printing needs of all steel plates in the shipbuilding process; The printing speed is fast, with a speed of up to 25m/min when used as an offline device. A steel plate with a size of 5.5 * 22m can complete all printing work in 53 seconds, which is more than 90% slower than traditional methods.

application area 
Tool manufacturing/engineering machinery

相关推荐

  • The research team describes laser direct writing of single-photon optical fiber integrated multimode storage on a communication band chip

    Figure: Experimental setup.Quantum memory that relies on quantum band integration is a key component in developing quantum networks that are compatible with fiber optic communication infrastructure. Quantum engineers and information technology experts have yet to create such a high-capacity network that can form integrated multimode photonic quantum memories in communication frequency ban...

    2023-08-04
    查看翻译

  • Fiber laser array for single pixel imaging is expected to achieve remote detection

    Single pixel imaging (SPI) is a novel computational imaging technique that has been widely studied in recent years. This technology only uses single pixel detectors without spatial resolution to obtain spatial information of targets.It has unique advantages and compensates for the shortcomings of traditional imaging technologies based on array detectors, such as relatively immature or expensive ar...

    2024-05-15
    查看翻译

  • The researchers expect the EUV lithography market to grow from $9.4 billion in 2023 to $25.3 billion in 2028

    The researchers estimate the period from 2023 to 2028. EUV lithography will address the limitations of traditional optical lithography, which has reached its physical limits in terms of resolution. The shorter wavelength of EUV light allows for the creation of smaller features and tighter patterns on silicon wafers, enabling the manufacture of advanced microchips with greater transistor densities....

    2023-08-04
    查看翻译

  • Dublin City University has successfully tested the laser components of the next generation space navigation atomic clock

    The team collaborated with Eblana Photonics and Enlightra to showcase for the first time a new caliber laser, which will enable atomic clocks to be more efficient and compact for future satellite missions.This innovation addresses the key needs identified by the European Space Agency, which is the leading organization for the next generation of space navigation systems. This work was recently publ...

    2023-09-22
    查看翻译

  • AM Research has released its latest quarterly data and forecast report

    Recently, additive manufacturing research company AM Research released its latest quarterly data and forecast report, which deeply analyzes the latest developments in the global 3D printing market, covering multidimensional analysis of suppliers, printing technology, geographic location, and application areas.According to the report, the global 3D printing market once again demonstrates strong gro...

    2024-09-29
    查看翻译