简体中文

The research team describes laser direct writing of single-photon optical fiber integrated multimode storage on a communication band chip

398
2023-08-04 16:32:15
查看翻译
 
Figure: Experimental setup.
Quantum memory that relies on quantum band integration is a key component in developing quantum networks that are compatible with fiber optic communication infrastructure. Quantum engineers and information technology experts have yet to create such a high-capacity network that can form integrated multimode photonic quantum memories in communication frequency bands.
 
In a new report in Science Advances, Xueying Zhang and a team of researchers describe optical fiber integrated multimode storage of single photons in the communication band on a laser direct writing chip.
 
A memory device made of fiber pigtail erbium-doped (Er3+) lithium niobate (Er3+:LiNbO3) provides a memory system that is integrated with an on-chip component of a telecom band fiber integrated. The results of this study highlight the potential for the formation of future quantum networks based on integrated photonics devices.
 
Photon quantum memory
Quantum states of light can be reversibly mapped onto matter to create photonic quantum memory, ideal for long-distance quantum communication across distributed quantum networks.
 
Physicists have integrated photonic quantum storage devices based on optical waveguides with other integrated quantum devices, such as quantum light sources, photonic circuits, and single-photon detectors, to design interconnected multifunctional quantum architectures. In this work, Zhang et al. developed an integrated multimode memory device for telecommunication bands based on lithium niobate waveguides.
 
The laser writing waveguide they designed uses femtosecond laser micromachining to directly couple to a single-mode fiber pigtail, by using optical collimators on both sides of the device to promote compatibility with fiber optic communication systems.
The team developed an on-chip quantum memory system that uses an atomic frequency comb protocol. The integration of a 4 ghz wide atomic frequency comb enabled the team to experimentally implement a multi-mode quantum memory system, paving the way for the formation of an integrated quantum network with memory compatible with fiber optic communication infrastructure.
 
Figure: Fabrication and calibration of Er3+ : LiNbO3 waveguide.
experiment
Zhang et al. used femtosecond laser micromachining technology to fabricate type III waveguides on erbium-doped lithium niobate crystal wafers and designed a memory device.
 
The bulk crystals of the material maintain the concentration of doped ions to an extremely small percentage and allow the laser to write the coupling between the waveguide and the single-mode fiber. The scientists glued doped lithium niobate crystals to a copper radiator with an optical collimator with two single-mode fiber braids.
 
They placed the fiber-optic integration unit in a dilution refrigerator and observed a total optical transmission frequency of 26 percent for the entire cryogenic unit.
 
Multimode storage
Multimode storage experiments include generating single photons and preparing quantum storage and measurement systems based on atomic frequency combs. The team generated the correlated photon pairs through a cascade of second harmonic generation and spontaneous parameter down-conversion processes in a lithium niobate waveguide module pumped with a series of light pulses.
 
For single-mode storage, the team used a single laser pulse with a duration of 300 picoseconds. The scientists detected photons in the device with a superconducting nanowire single-photon detector. Zhang et al. analyzed the instrument's detection signals using a time-to-digital converter.
 
Zhang and his colleagues delivered Erbium (Er3+) ions into a periodic absorption structure, such as an atomic frequency comb with a tooth spacing of 5 MHz, which corresponds to a storage time of 200 nanoseconds. The team demonstrated the storage of non-classical light with a large time-bandwidth product.
 
They then sent the signal photons to the atomic frequency comb memory and calculated the efficiency of the system. Based on the transmission efficiency of the storage device and the spectral filtering of the input photons, they calculated the internal storage efficiency. The results show that the quantum memory of the atomic frequency comb preserves the single photon purity and spectral purity.
 
These results allowed Zhang et al. to build an on-chip quantum memory with a memory time of 200 nanoseconds, while establishing negligible crosstalk in the instrument.
 
foreground
In this way, an integrated multimode quantum memory based on laser writing erbium-doped lithium niobate waveguide is demonstrated. The team achieved a storage bandwidth of 4 GHz and a storage time of 200 nanoseconds.
 
These achievements in wideband multimode quantum storage will open the way for the generation of high-rate quantum networks. While these results are important, the researchers believe that several upgrades are still needed to design a fully functional device to facilitate quantum networks.
 
The current approach integrates the reliability of fiber integrated devices compatible with fiber telecommunications infrastructure to provide promising laser writing components with wideband multiplexed storage characteristics. The research team hopes to combine a photon pair source with an integrated memory to implement a high-rate quantum repeater protocol, thereby creating a large-scale quantum network.
 
These results will contribute to the realization of quantum systems with large capacity, scalability, and compatibility for fiber optic communication, with implications for the future and the construction of global quantum networks.
 
Source: Chinese Optical Journal Network
相关推荐
  • Enhanced laser heterodyne spectroscopy contributes to the measurement of atmospheric greenhouse gases

    The research team led by Professor Gao Xiaoming of the Chinese Academy of Sciences Hefei Institute of Physical Sciences has improved the measurement accuracy of atmospheric greenhouse gases by using erbium-doped fiber amplifier assisted laser heterodyne radiometer.The study was published in the Journal of Optics and was selected as an editor's selection.LHR is renowned for its high sensitivity and...

    2023-10-25
    查看翻译
  • Application and Effect of Laser Cleaning

    Mold cleaning: Mold plays a very important role in industrial production. Currently, there are over a thousand mold related enterprises in China, driving the related output value to nearly 10 billion yuan. Among them, mold cleaning is an essential step in mold production. Laser can achieve contactless cleaning of molds, which is very safe for the surface of the mold, ensuring its accuracy, and can...

    2023-10-14
    查看翻译
  • Yang Xueming from Shenzhen has been elected as a Foreign Fellow of the Royal Society of England

    On May 20th, the Royal Society announced on its official website that over 90 scientists who have made outstanding contributions to scientific research have been newly elected as Fellow of The Royal Society (FRS). Yang Xueming, an academician of the CAS Member and chief director of the Shenzhen Free Electron Laser Device, was newly elected as a foreign academician of the Royal Society of England.A...

    05-26
    查看翻译
  • Artists transform paper into meticulous laser cutting designs

    In the past few years, paper artists have demonstrated the versatility of their common fiber materials. Some people manually cut or carve paper, while others combine traditional craftsmanship with digital design. Ibbini Studio is in this situation. Abu Dhabi artist Julia Ibni collaborated with computer scientist Stephen Noye to create sculptural paper works inspired by decorative patterns such as ...

    2024-01-23
    查看翻译
  • Tokyo Institute of Technology collaborates with EX Fusion to promote laser fusion energy closer to commercialization

    Recently, Tokyo Institute of Technology and EX Fusion established a collaborative research group focused on promoting liquid metal equipment to achieve commercial laser fusion reactors. The two sides held an official signing ceremony in Tokyo on October 11th, marking the official start of their cooperation.The EX Fusion Liquid Metals Collaborative Research Group was established with the support of...

    2023-10-17
    查看翻译