The RDC6442 board fails to connect the device in the processing preview when downloading graphics to the back panel of the motherboard

John Trant

分类:

睿达

标签:

Ruida
RDC6442

1.2K

查看翻译

2022-11-17

RDC6442 board, the model of the motherboard is 8.00.8, and the software is v8.0.20. After downloading the graphics to the motherboard, the panel fails to connect the device in the processing preview. How to solve this problem?

Smith

2022-11-21

Cause analysis:
Error upgrading file, software version is too low.
Solution:
Upgrade the version file again, and upgrade the software to the latest version 8.00.22/8.00.23 or above.

查看翻译

The RDC6442 board fails to connect the device in the processing preview when downloading graphics to the back panel of the motherboard

Nesting

Switch to the manual state, press the Z+and Z - buttons on the operation panel, and the Z-axis motor will not move

For V6342, during processing, the processing parameter - path optimization - check from inside to outside has no effect

The cutting head does not lift up and down, but the motor has sound.

At the beginning of processing, it will automatically reset to the origin