I’ve just set up my laser machine. I have my homming set up at front left of machine bed. But can you set a auto park possion at the top left after it’s finish homming

• laser cutting

jessie

12 days ago

328

3

0

I need some help, see pic. I want to engrave this image just like it is but how do I do that with part of 1 image on top of the other? I want the gate to look like it’s in front of the house with a little distinction between the two while still being able to see the house parts b...

• laser engraving

jessie

11-20

301

1

0

cutting a square 5 x 5mm it cuts it at 4 x 5mm, it works fine when I disconnect the R5 looks like something to do with the Y axis

• laser cutting

jessie

11-11

400

3

0

While cutting on the Atomstack X24 Pro, the laser head encountered an obstacle on the work surface. Since then, the y-axis movement has not been performed correctly. The movement and noise are like rattling. Can anyone tell me what I should check to find the cause and, if possibl...

• laser cutting

jessie

11-03

387

1

0

Myth 1: High equipment costs Reality: Although the initial investment in a laser tube cutting machine may seem substantial, the long-term operational costs can be competitive compared to other cutting methods. Laser tube cutting machines offer high efficiency, minimal material wa...

• laser cutting

jessie

10-27

398

0

0

In laser welding, the welding penetration depth (the depth at which the base metal completely melts and fuses) and aspect ratio (the ratio of weld depth to width) determine the quality and performance of the weld seam. Therefore, when analyzing and optimizing laser welding proces...

• laser welding

jessie

10-16

370

0

0

I have purchased a laser (NUOF 40W laser module laser head 450nm TTL blue laser module) and plan to install it on my CNC machine. I replaced the firmware of the CNC machine. The CNC machine is working properly, but the laser cannot be turned on. There should be a fan inside the l...

• laser engraving

jessie

09-28

551

2

0

Laser cutting is an efficient automated processing method that utilizes a highly energy dense laser beam to rapidly evaporate and irradiate a portion of the material. By moving the laser, a cutting seam is formed to achieve the cutting purpose. Laser cutting, as an intelligent CN...

• laser control
• laser cutting
• automatic border pat

jessie

04-14

934

0

0

Glass is a material with high hardness, and traditional mechanical carving methods are often difficult to use. However, as a high-precision and high-efficiency burning method, laser can overcome this difficulty. Laser engraving of glass can not only achieve high-precision engravi...

• laser marking

jessie

2024-11-27

953

1

0

A servo control system is an operating system that can automatically control the mechanical motion of a testing device according to predetermined requirements. There are many classification methods for servo systems, and there are three common classification methods: 1. Classify...

• servo control

jessie

2024-08-28

1.1K

1

0

The DC brushless motor eliminates the carbon brush and slip ring structure, reduces friction losses, and significantly improves the efficiency of the motor. At the same time, the motor itself has no excitation loss, further improving the comprehensive power saving rate, which can...

• motor
• brushless motor

jessie

2024-06-28

1K

1

0

In the fields of engineering design and mechanical manufacturing, the selection of transmission methods plays an important role in optimizing machine performance. Ball screw is a common transmission method with unique characteristics and advantages. In practical applications, we ...

• gearing

jessie

2024-04-26

1K

1

0

Servo motors are widely used in the field of automation control, such as in robotic arms and AGV vehicles, where there are varying numbers of servo systems. So, what are the future development trends of servos? Let's put it simply. 1. Communicationalization. There are more and m...

• motor
• servo motor

jessie

2024-03-16

1K

1

0

1. Transition curve interference Transition curve interference refers to the interference at the transition curve between the tooth tip of a gear and the tooth root of the matched gear during the meshing process.   2. In order to prevent interference in the transition curve dur...

• gearing

jessie

2024-03-11

811

1

0

Generally, the following aspects should be considered for inspection: 1) Whether the motor torque is large enough and whether it can drive the load, we generally recommend users to choose a motor with a torque 50% to 100% greater than the actual need when selecting, because stepp...

• motor
• stepper motor

jessie

2024-02-21

1K

1

0