The reducer is a key part of the industrial robot, accounting for about 32% to 37% of the production cost of the entire industrial robot. With the increase in the output of industrial robots, the demand for speed reducers will also increase rapidly. It usually needs to use four to six reducers, mainly RV reducers, while harmonic reducers are used l...

roy

2023-02-01

961

0

0

1. Deceleration or speed change deviceThe function of the deceleration or speed change device is to change the speed and torque of the prime mover to meet the needs of the working machine.2. Start-stop reversing deviceThe start-stop reversing device is used to control the start, stop and change the direction of movement of the working machi...

Abel

2023-01-31

1.2K

1

0

Role of mechanical transmission: The role of mechanical transmission is to transmit motion and force. The types of commonly used mechanical transmission systems include gear transmission, worm gear transmission, belt transmission, chain transmission, gear train, etc.Gear transmission: gear transmission is realized by shifting the driven gea...

Marshall

2023-01-31

992

0

0

The appearance of the dense cabinet makes our office life convenient and tidy. Compared with the traditional filing cabinet, it has many advantages. It is loved by everyone and widely used. From the meaning of the words on the surface, it can be seen that the intelligent dense cabinet is not an ordinary filing cabinet. Since it is intelligent, it m...

Clarence

2023-01-29

843

0

0

With the rapid development of society and various industries, chain conveyor came into being. Chain conveyor has many advantages in use. It is a kind of continuous conveying machinery that drives the conveyor belt through the sprocket, takes the flexible conveyor belt as the material bearing part and the traction part, and continuously transports t...

Gilbert

2023-01-29

877

0

0

Each extruder is equipped with a transmission device, which is used to connect the transmission output shaft and the main reducer input shaft that are not in the same straight line, and ensure that the included angle and distance between the two shafts can still transmit power stably and reliably under the condition of frequent changes. What is the...

Smith

2022-12-24

1.2K

0

0

Although plastic gears are relatively "mature" recently, many products on the market still use steel gears. But in fact, it is difficult to get rid of the humiliation and worry about the use of plastic gears, which should be traced back to the application of plastic gears in other non critical applications of various toys.However, with the progre...

Robert Evans

2022-11-29

1.1K

0

0

Plastic gearbox is a kind of product with specified accuracy requirements, especially in the matching degree between gear and housing, and between gears. Even small changes in structure may affect the matching degree between them. If the casing of the plastic gearbox is changed, the number of teeth may change and the internal structure may change c...

Keegan

2022-11-23

1.1K

0

0

In mechanical design, the knowledge of gear transmission occupies an important position. Gear transmission is a mechanical transmission that transfers power and motion by using the teeth of two gears to mesh with each other. Among all mechanical transmissions, gear transmission is the most widely used, which can be used to transmit the motion and p...

Nugent

2022-11-21

1K

0

0