I’ve download a few patterns from La Hobby Guy. Some of the files are DXF and they don’t appear in the window that shows files available to load in the art library. Only lbart.However if I go the file, open in Lightburn, I can open fine. Can DXF files be loaded in the art library?Thanks!
2023-09-0426710On August 29, Huawei threw a bombshell - Huawei MATE 60 pro, which was sold out in less than an hour. The reason why the opening of the new model set off waves in the industry, mainly because at the beginning, China's high process chip was blocked by Western countries, directly let Huawei's performance "shock", and this action may mean that Huawei ...
2023-09-0436210Is there a way to print or otherwise display material library data?I have two similar (extensive) libraries and it’s pretty cumbersome to load one, expand the parents, dig out the settings, write them down, open another library, etc, etc.
2023-09-0245910I want to engrave into powder coated steel through masking tape so that I can leave the masking tape in place and paint the engraved areas. Anyone have any settings that work for this process using a Galvo laser. Any help would be appreciated.
2023-09-0236520I have my laser mounted secure, my camera is mounted secure, I run the calibration and the alignment, and everything is good for a while, then its out of align, I have to re calibrate it for it to work, every time.
2023-09-02289103d engraving when you have say a square image and you want to make it round, i know how to use the mask i do that but the sides and top and bottom are white and dont engrave is there a way to add the black to engrave those areas ? if this makes sence ?here is a picture you see the circle and it has white i want to make that part so that it engrav...
2023-09-0135310I’m engraving some Golf Tees. 10 at once. Positions are set. I pasted 10 small .jpg images of my lettering into the very tight tolerances of the thin tees. All set. Then when the burn started, the laser went way out of the printing zone, with long filled traversal areas on both sides of the lettering. See picture attached. what do I need to d...
2023-09-0137810Bonjour, je cherche comment graver un motif sur une pièce déjà découpée. J’ai téléchargé un motif etje voudrais graver uniquement sur les pièces présentent sur mon plateau, sans que ça dépasse.J’arrive à superposer le motif à ma pièc...
2023-08-3132810When I select the ‘square’ option then put text inside, I only get one cut/layer line, so it all gets cut out or burned. I want to make and cut patches without cutting the Lester’s out inside of it
2023-08-3139510I have a new issue with my Xtool D1 Pro 20W, I have the fire button set to 1% which I have used for over a year with no issues. However now when I try and frame the laser is burning into the workpiece.I have checked and $$30 is set correctly to 1000 and $$32 is set to 1I have re installed the Xtool profile as well as Lightburn. I have also rolled b...
2023-08-3142010I have two problems . . .1. I have been trying to use pointer offset in the device settings but Lightburn generates an error on Start if I enter a negative value in the Y axis setting. This happens even if the laser head is placed well within the work area. I’ve seen this done in a YouTube video using Lightburn and my same make/model ...
2023-08-3041110HiAre there more detailed tutorials for using the line tool? I can’t find any…I drew myself a makers mark. I wish to thicken the lines. How do I do that?
2023-08-3043410Hello all. I am a total novice and newbie to the world of laser cutters/engraversI have just purchased the Atomstack P7 M40. Seems a great little unit.My question is this. If I home the unit, its fine. But as soon as I try to frame a job the laser mount (not sure what the technical name for this is) seems to try and come to far back and then the ...
2023-08-3047210Does anyone know why I would be getting this random line going through lettering. Laser head is cleaned and it only does it with font. Images are all fine. Ideas?
2023-08-3034110
- 暂无数据
简体中文
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski