So I want the yellow to fill, but the red lettering to just be line a with no fill. How is this achievable if it even is?

Patrick

2023-10-23

190

1

0

Recently, Bystronic of Switzerland released its financial report for the third quarter of 2023. The financial report shows that in the first three quarters of this fiscal year, due to the liquidation of backlog orders, Swiss Super 100's sales increased by 2.1% at a fixed exchange rate. However, due to the strong performance of the Swiss franc, espe...

Clarence

2023-10-20

189

1

0

I just received a new Atomstack A 40 Pro. I have contacted Atomstack with this problem but I get no response. Maybe someone on here can help. It is supposed to achieve 30,000 mm/min but I can only get it to move at about 6000 mm/min. the baud rate is set at 115,200. Should it be set at a different rate? If baud rate is not the problem, what do I do...

Gilbert

2023-10-20

222

1

0

When going to help to search for info and I click a returned result, the menus at the stop responding. You can click through all menus and they highlight but they no longer respond by opening the menu items that are normally displayed. Clicking application name, Lightburn, at the top of the screen also doesn’t respond. If I go back to search ...

Cyril

2023-10-20

198

1

0

CinIonic is a global leader in Barco's company and laser cinema technology. Today, at the SMPTE 2023 Media Technology Summit held in Hollywood, a new Barco laser projector specifically designed for post production was unveiled. As part of the company's award-winning Barco Series 4 laser series, the Barco Series 4 SP4K-P is the first laser projector...

Smith

2023-10-19

204

1

0

Buongiorno, dopo l’aggiornamento di lightburn alla versione 1.4.03 è sparita la funzione “constant power mode” dall’impostazione dei livelli.Qualcuno sa dirmi come riattivarlo o se è un bug da segnalare?Leggendo altre discussioni mi pare di capire che è una funzione presente in tutte le versioni

Abel

2023-10-19

239

1

0

Hello you all, how are you?Pretty new to laser cutting but familiar with waterjet-cutting and gcode.Cutting speeds are a hot topic resulting in many question especially from newby’s.Here is what I was thinking;Does Lightburn know what the actual cutting speeds are or where by reading the gcode?The gcode should contain the actual speeds for a...

Aaron

2023-10-19

220

1

0

Hello!I have issue with my A40630. Trying to cut 4mm Plywood, but it takes 20 passes at full power. Also I am using air assist.Tried focusing. Can anyone help me out?

Keegan

2023-10-18

212

1

0

I recently updated my sculpfun s9 with limit switches, following the youtube video provided, i learned that where the laser hits the limit switches and where Lightburn sees the laser, is not the same. Lightburn sees it at being X: -377.00 Y: -392.00 Z: 0.00. Would there be a way to make its current position the new 0,0 ?

Tory

2023-10-18

263

1

0

I’m using a Razor 3 130Watt C02 Laser and I am having trouble with cuts. I am having to use multiple passes to cut through this 3mm particle board, but somehow our 50watt Epilog still is getting cleaner cuts with one pass. I’ve tried running 130Watt at 60/55% power at 35mm/s. To actually cut with the 130Watt laser I’m having to ru...

David

2023-10-18

260

2

0

I have my lasers in a a shop with wifi and one in another shop does not have wifi, I take the laptop to each one. Can I request OFFLINE activation on the same computer and use it on and off line? Example, can I bounce back and forth using the wifi or the offline? Or once I get the activation for offline will it mess up my using wifi on that compute...

Henry

2023-10-17

249

1

0

When is use Frame to position my design the Frame size outline is always larger than the design. Yet when I run the file the design is exactly what size Lightburn shows it should be.

Robert Evans

2023-10-17

214

0

0

Help me pleasALARM:2The G-code motion target exceeds the machine travel. Maintain the machine position safely. The alarm can be unlocked. (Right click on the “Devices” button to reset the connection).On or near line 3:I get this error does anyone know about this error?

John Trant

2023-10-17

193

1

0

looking to make a door hanger how do i get the pattern into the inside as in pic .confused

roy

2023-10-16

212

1

0

Hello,I have just cleaned my laser top to bottom but I can’t figure out where this plug is supposed to go. It is a part of the air assist fan, but I don’t see a port for it to plug into.It is a tiny white plug that is on the brushless DC fan. Please help!

jessie

2023-10-16

201

1

0