Hi :slight_smile:I’m using LightBurn for a while now. There’s a problem I keep having where angled\curved sections of my designs are not cut through. Cuts would work perfectly in the x/y directions, but when the movement involves x&y motion at the same time, cutting does not work as well.See the attached images - paths at about 45 d...
2023-03-2075210Lead in/out does not show up in Workspace.in Preview i can see. How to see in Workspace?
2023-03-2098410We got another Boss LS3655 delivered and setup went smoothly, belts are tight, lens is tight, mirrors are spot on, Bed is level, Head is 90^, alignment is perfect. We double checked everything. no issues. But, it’s printing squiggles on smaller font 1" size in light burn. these are Pre-loaded Fonts in lightburn, so no squiggle in the Original...
2023-03-1881310Hi can settings be changed and saved during the burn. I would like to change the number of passes on a particular layer that is being engraved. Or would I have to wait till current layer is done then start from the beginning again then go over itThanks
2023-03-1893810My laser just stopped working. I shut it off for the night and came back and it won’t fire.It runs the whole job with no laser.Any ideas on settings I should check? I set and reset focus several times.I have tried every combination of speed power to no avail.Any ideas?
2023-03-1882510I cut a cutting test card but when cutting the same material my machine does not cut through using the settings from the card. Any idea why?
2023-03-181K10I have the lose camera control issue all the time… kind of a pain to restart with shift to fix…but my other issue is many time when i open a new window it does not show up on a new tab … is there a way to fix this
2023-03-1895910I am installing lightburn on new laptop and got a couple questions.I am at the point where it found my device and is calling it GRBL, and it shows axis X=650mm & axis Y=500mm, and wants to know the dimensions of my working area is. The mm markings on the frame for X axis is 440, and Y axis is 520. On the Y axis there is a hard stop at 40 with l...
2023-03-1881710Hi, for a special project, I have to cut at 1000mm/sec but my machine refuse to go above what seems to be 500mm/sec. I went to the machine, modified the Idle Speed to 1000, the X axis max speed is at 1000mm/sec because I’m able to move at that speed but even if I input a cut speed of 1000, it runs lower that that.It’s not a matter of a...
2023-03-1791910How can i flip my project ? its right on screen but burns upside down
2023-03-1798520previously connected dev file downloaded previously. Xtool updated today. Lightburn up to date. Watched so many videos. Is this due to the xtool update?
2023-03-171K10So I’m tasked with making a table on our laser here at work and our software won’t hatch and won’t do pretty much anything but etch holes and lines. That’s what we get for spending 300k+ I guess. So I brought my flat pattern in to lightburn. It seems to look ok in draw mode but then I try to export it and all I get is the pe...
2023-03-171K10Recently, scientists from the Swiss Federal Institute of Technology (EPFL) and IBM announced the development of a new type of laser that is expected to have a significant impact on optical ranging technology.The laser is based on lithium niobate material, which is commonly used in the field of light modulators and can control the frequency ...
2023-03-1799500Anyone from ruida? We'redebatingwhether6445g or 6442g suit for our machine??
2022-11-121.1K21hello friends i am making my own galvo laser marking machine but i am confused about the laser beam expander i want to used galvo head 20mm spot with 300*300 working lens so which one beam expender i used for it if some know about it please help me my wechat ID is aqua4108363
2023-03-1678310
- 暂无数据
简体中文
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski