Tiếng Việt

Shanghai Institute of Optics and Mechanics proposes a new scheme of Er doped silicate fiber as an extended L-band broadband amplifier

907
2024-06-05 15:03:58
Xem bản dịch

Recently, Hu Lili, a research group of the Advanced Laser and Optoelectronic Functional Materials Department of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, proposed a new scheme based on field strength optimization of Er doped silicate fiber as an extended L-band broadband amplifier. Relevant research achievements were published in Optics Letters under the title of "Er doped silicate fiber amplifiers in the L-band with flat gain".

The rapid development of big data and artificial intelligence has put forward higher requirements for the capacity of dense wave division multiplexers (DWDMs) in the new generation of optical communication systems. Compared to the mature C-band (1530-1565nm) erbium-doped fiber amplifier (EDFA), the L-band (1565-1625nm) EDFA has become a new generation of scalable optical communication products. However, the development of L-band EDFA faces difficulties and challenges: the gain of Er-doped fibers is limited by low longwave emission cross-sections and severe excited state absorption, resulting in very small gains for wavelengths greater than 1600nm. Therefore, how to improve the long wave gain of Er doped fiber materials is a key scientific problem that urgently needs to be solved in L-band broadband amplifiers.

The research team proposes a new scheme of micro ion field emphasis control to enhance the gain and spectral shaping of Er ions in a silicate fiber matrix. The feasibility of using silicate optical fibers as long wave gain enhancing substrates for Er ions has been confirmed both theoretically and experimentally. This scheme has achieved significant improvement in L-band gain and optimization of gain flatness in Er doped silicate optical fibers. At the same time, by adopting an all fiber scheme with heterogeneous fiber fusion, only a 1.5m long silicate fiber is used. At the longest wavelength of 1625nm in the L-band, the gain coefficient is 4.7dB/m, which is better than the 0.3dB/m of quartz fiber. In addition, the gain flatness of the fiber in the L-band is 0.8dB, which is better than the 5dB of quartz fiber. Compared to quartz fiber, this fiber has a higher doping concentration, shorter usage length, and larger gain coefficient, providing key material support for the new generation of L-band EDFA.

This work has received support from the National Natural Science Foundation of China and national key projects.


Figure 1: L-band gain of Er doped silicate optical fiber

Source: Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences

Đề xuất liên quan
  • Laser technology reveals hidden gases in complex mixtures

    Laser Network reported on January 11th that modern equipment has been fine tuned to detect highly specific gases, including trace gases found in the atmosphere, gases present in combustion exhaust emissions, and gases used in technology plasma applications.They achieve this by calculating the percentage of light at a certain wavelength that is absorbed or attenuated by the sample. This way, the co...

    2024-01-11
    Xem bản dịch
  • The research team establishes synthetic dimensional dynamics to manipulate light

    In the field of physics, the synthetic dimension has become one of the forefront of active research, providing a way to explore phenomena in high-dimensional space, surpassing our traditional 3D geometric space. This concept has attracted great attention, especially in the field of topological photonics, as it has the potential to unlock rich physics that traditional dimensions cannot reach.Resear...

    2024-03-20
    Xem bản dịch
  • Overview: High throughput preparation of alloy composition design in additive manufacturing

    Researchers from the New Materials Technology Research Institute of Beijing University of Science and Technology and the Beijing Modern Transportation Metal Materials and Processing Laboratory reported a review of high-throughput preparation of alloy composition design in additive manufacturing. The relevant research is titled "High throughput preparation for alloy composition design in additive m...

    2024-07-08
    Xem bản dịch
  • MIT research enables 3D printers to recognize new materials

    According to scientists at MIT, mathematical formulas developed by MIT researchers and other institutions can significantly improve the sustainability of 3D printing.Issues with 3D printing of plastics3D printers typically use mass-produced polymer powders to print parts, which are consistent and predictable, but also difficult to recycle.Other more environmentally friendly options also exist and ...

    2024-04-18
    Xem bản dịch
  • Coherent lasers will help expand the scale of fusion tokamaks

    Coherent company's excimer lasers can be more widely used in fusion reactor applications, after the US based photonics giant signed a "letter of intent" with Japan's Faraday 1867 Holdings.Faraday 1867, headquartered in Kanagawa Prefecture, is said to have become the world's leading manufacturer of high-temperature superconducting (HTS) tape through its subsidiary Faraday Japan factory.This tape is...

    2023-10-11
    Xem bản dịch