GZTECH High-power Fiber-based Green Laser Source adopts a fiber-based fundamental frequency amplification and solid-state frequency doubling technology approach, offering advantages such as high average power and adjustable first pulse. The optimized single-mode amplification technology scheme enables high beam quality green light output. Through t...
8 giờ trước700GZTECH 100W-500W CW products，single-mode，suitable for IC marking, precision cutting and welding, as well as 3D printing applications.Power:100W 200W 300W 500WAdvantageHigh beam quality(M<1.2)Max modulation frequency 50kHzSingle mode fiber core diameter (14μm)Air-cooled and water-cooled optionalMaintenance-freeSpec
06-246900Including Q-switched nanosecond pulsed laser based on single oscillator scheme and picosecond and nanosecond laser based on traveling wave amplification scheme, which can realize infrared, green to ultraviolet laser output, suitable for glass, plastic, silicon wafer, PCB, ceramic marking, cutting and deep engraving applications of other materials....
05-2921600I am planning to order a fiber laser marking/engraving machine. Almost done. It will be MOPA M7 100 W E2 source from JPT. Now the lenses: quartz material and i decided to take 4 lenses. My current pick is F100, F210, F290 and F420. What you think about this set? I’m buying this laser for general experiments, playing around in home workshop, marking...
04-1265931In the vast sky of laser technology, nanosecond lasers have become the "precision surgical knives" in industrial manufacturing, medical research and other fields due to their unique pulse characteristics, efficient energy conversion and wide application scenarios.The working principle of nanosecond laserNanosecond lasers generate optical amplific...
04-15369001、 LaserLaser is the core component of laser marking machine and an important component for generating laser. Normally, the service life is long, but regular cleaning and maintenance are required. If the laser shakes or becomes unstable during use, it needs to be replaced or repaired in a timely manner.2、 LensThe lenses of a laser marking machine ...
03-1834300Laser marking has certain requirements for the glossiness, thickness, and hardness of aluminum material surfaces.Requirements for laser marking on aluminum material surfaceDuring the laser marking process, factors such as glossiness, thickness, and hardness of the aluminum surface can all affect the marking results. Therefore, in order to achieve...
03-0440000I have an Algolaser DIY 20W and everything works normally. Recently, I bought a Delta 22W, and when performing the material test, I have this misalignment problem.I have already tried tightening the belts and checking for vibrations, but nothing, absolutely nothing works.Does anyone have any ideas on how to solve this?
02-2042280I have a six month old sculpfun S30 22W. I have always used a kerf of 0.13mm outward when making boxes. Lately I have noticed that the joints are no longer as tight as they were at the beginning and I have to set the kerf to 0.20mm outward. Is this normal? Is there some setting somewhere, or has the beam gone out of focus?
02-2843730Text misaligned using rotary roller
02-21384601. If the motor burns out, generally not both machines will burn out. Just change the motor object that drives the output to test whether the other machine is normal. Motor damage can generally only be replaced by contacting after-sales service.2. Drive failure. If the drive light does not light up or flashes continuously with a burnt smell while...
02-2836500The operating environment of laser marking machineThe laser marking machine must ensure a relatively clean surrounding environment during the production process, free from any interference from dust, grease, and chemical pollutants, which can accelerate the aging and damage of the laser marking machine.The impact of environmental dust on laser ma...
02-2742800If you at the TWhat causes the arrow tips in the corners of the T all other fonts have it also except the OThis an Arial font which has been switched from a Sans Sherif font which did the same thing.From what I can see I have nothing extra switched onThe strange thing is if I increase the power the arrows go away which doesn’t work in this case. Th...
02-1736861Fault in the fiber optic section1. Fiber breakage: Fiber breakage is the most common situation in fiber laser machine failures, usually occurring in fibers that have been in use for a long time or have been excessively bent. The solution is to replace the fiber with a new one.2. Fiber optic pollution: When the surface of the fiber optic cable is co...
02-2038000Principle of adjusting laser powerThe power of the laser marking machine directly determines the depth and speed of marking. Different materials have different requirements for laser power, and adjusting the laser power to be just right can ensure the best marking effect.Choose the appropriate power size1. Metal materials:For metal materials, hig...
02-1544300
- Không có dữ liệu
Tiếng Việt
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski