chanelink logo
CHANELINK
Türkçe

A German research team has developed a new type of perovskite stacked battery

898
2025-02-08 16:14:20
Çeviriyi gör

According to relevant media reports, a research team from the Helmholtz Center in Berlin, Germany, and Humboldt University has jointly developed a new type of perovskite stacked battery. This battery has broken the world record for similar batteries with a photoelectric conversion efficiency of 24.6%.

 



In the solar cell family, in addition to silicon-based solar cells, there are also thin-film solar cells such as copper, indium, gallium, and selenium based thin-film solar cells (CIGS cells). The production of this type of battery requires very little energy and materials, so its impact on the environment is also minimal.

The team combined CIGS cells as the bottom with perovskite based top cells to develop a new stacked solar cell. By optimizing the contact layer between the top and bottom batteries, they increased the energy efficiency of the new battery to 24.6%. This energy efficiency value has been certified as a new world record by the Fraunhofer Institute for Solar Energy Systems in Germany.

The team also developed CIGS sub cells and contact layers, and used high-performance cluster systems. This system can accurately deposit perovskite and contact layers in a vacuum environment, providing a solid guarantee for the high efficiency of new batteries. They believe that in the future, the photovoltaic conversion efficiency of new perovskite stacked solar cells is expected to exceed 30%.

Source: opticsky

İlgili öneriler

  • Comparison of Blue and Infrared Wavelength in Pure Nickel Laser Deep Fusion Welding Process

    It is reported that researchers from BIAS Bremer Institution f ü r angewandte Strahltechnik GmbH in Germany have reported a comparative study of laser deep penetration welding processes for pure nickel using blue and infrared light wavelengths. The related research was published in Welding in the World under the title "Process comparison of laser deep penetration welding in pure nickel using blue ...

    2024-08-13
    Çeviriyi gör

  • Progress makes laser based imaging simpler and more three-dimensional

    a. b. Schematic diagram of PACTER system calibration and imaging program. BT, beam trap; DAQ, data acquisition unit; HWP, half wave plate; PBS, polarization beam splitter; ER, traverse the relay. The difference between the two modes is highlighted by a black dashed box. c. Schematic diagram of a single component ultrasonic transducer manufactured on ER. d. The ultrasound transducer detected 1D P...

    2023-12-05
    Çeviriyi gör

  • The birth of multi photon 3D laser printing technology: printing millions of particles within 1 second

    Multi photon 3D laser printing technology, as a disruptive micro manufacturing technology, is facing two major challenges: speed and material compatibility. However, the latest research has made breakthrough progress, successfully increasing printing speed tenfold while maintaining excellent detail accuracy.In this remarkable study, scientists abandoned the traditional single beam printing method ...

    2024-04-19
    Çeviriyi gör

  • Observation of nanoscale behavior of light driven polymers using combination microscopy technology

    Expanding our scientific understanding often boils down to observing what is happening as closely as possible. Now, researchers from Japan have observed the nanoscale behavior of azo polymer films and triggered them with lasers.In a study published in Nano Express last month, researchers at Osaka University used a combination of cutting-edge scanning high-speed atomic force microscopy and optical ...

    2024-03-12
    Çeviriyi gör

  • Intelligent laser welding with dynamic beam shaping function can reduce the demand for filler wire

    In EU project ALBATROSS, Fraunhofer IWS has developed battery housing for E-vehicles.Laser processes with dynamic beam shaping create stable joints even in challenging material combinations. Recent applications demonstrate how to eliminate filler materials while improving quality, energy efficiency, and production logic.Fraunhofer Institute for Material and Beam Technology (IWS) will present novel...

    09-05
    Çeviriyi gör