Türkçe

The role of PTFE in laser processing

492
2024-07-26 11:42:10
Çeviriyi gör

Polytetrafluoroethylene (PTFE) has improved the efficiency and repeatability of nanosecond and picosecond laser processing technologies used in microelectronics and display glass manufacturing.

 



In the field of precision manufacturing, the demand for efficient and repeatable processes is crucial. The laser structure of glass and laser ablation of silicon substrates are key areas where precision plays an important role.

These processes require meticulous consistency and stability to achieve the expected results. Polytetrafluoroethylene (PTFE), especially the glass filled PTFE G400 variant, has become an indispensable material for supporting substrates in laser processing.

Understand PTFE and its properties
Polytetrafluoroethylene (PTFE), commonly known as Teflon, is a fluorinated polymer known for its excellent chemical resistance, low friction coefficient, and high temperature stability. These characteristics make PTFE an ideal choice for various industrial applications (see Figure 1). When PTFE is reinforced with fillers such as glass fiber, bronze, carbon fiber, or fused silica, it gains additional mechanical strength and dimensional stability.

Characteristics of glass filled polytetrafluoroethylene
Glass filled PTFE G400 is a special variant that incorporates glass fibers into the PTFE matrix to enhance its strength and stability. Due to the following four key characteristics, this composite material is particularly suitable for supporting glass and silicon substrates during laser processing:

Mechanical strength and stability. The addition of glass fiber greatly improves its mechanical strength. This enhancement ensures that the material can support the substrate without deformation and maintain the precise alignment required for laser processing.

High temperature resistance. Laser processing, especially nanosecond and picosecond laser technology, generates a large amount of heat during focusing. The high temperature resistance of the material ensures its stability and non degradation under the general average and peak power conditions of ultra short pulse laser processing.

Chemical inertness. PTFE has inherent chemical inertness, which means it does not react with any residues generated during substrate or laser processing. This characteristic is crucial for maintaining the integrity and cleanliness of the substrate.

Low friction coefficient. The low friction coefficient of the material allows for smooth handling and positioning of the substrate, thereby minimizing the risk of damage during the setup and processing stages.

Enhance visibility and alignment
One of the prominent features of polytetrafluoroethylene is its pseudo bright white appearance. It provides a sharp contrast between the substrate and the background, greatly improving the visibility of machine vision inspection and calibration stages. In laser processing, precise alignment of the substrate is the key to ensuring that the laser beam interacts with the material at the correct position and angle.

The high contrast it provides enables operators to quickly and effectively achieve precise manual and automatic machine vision calibration, reducing setup time and improving throughput.

Stability of nanosecond and picosecond laser processing
Nanosecond and picosecond lasers provide high-energy pulses in extremely short durations, which can accurately modify the surface of glass substrates or ablate silicon with minimal thermal damage to surrounding materials. But the success of these processes largely depends on the stability and support of the substrate. When incorporated into fixtures or vacuum chucks, the mechanical strength and heat resistance of PTFE G400 ensure that the substrate remains securely in place. This precise positioning requires a laser beam to achieve the desired Bessel beam structure or milling through ablation.

The multifunctionality of PTFE fillers
PTFE G400 can be customized with various fillers to meet specific application requirements:
Carbon fiber. This provides excellent mechanical strength and conductivity, making it ideal for applications that require strong support and conductivity.

Different types of glass (including fused silica). Improve dimensional stability and reduce thermal expansion. Fused silica has excellent thermal shock resistance and is suitable for high-temperature applications.

The availability of these different fillers enables PTFE G400 to be customized for various laser processing environments to ensure optimal performance and durability.

Efficient and reproducible laser processing
The combination of enhanced visibility, precise alignment, and stable support provided by PTFE G400 is crucial for efficient and repeatable laser processing of glass and silicon substrates (see Figure 4). Repeatability is a key factor in industrial manufacturing, requiring consistent quality and performance in large-scale production operations. PTFE G400 helps achieve this goal by ensuring that each substrate is processed under the same conditions with minimal changes in positioning or alignment. This consistency translates into higher output and reduced waste, ultimately leading to cost savings and increased productivity.

Due to these reasons, the use of glass filled PTFE G400 has changed the laser processing of glass and silicon substrates:
Its unique properties, including mechanical strength, high temperature resistance, chemical inertness, and low friction coefficient, make it an ideal material for supporting substrates in nanosecond and picosecond laser structures and ablation processes.

Its bright white appearance improves visibility and helps with precise alignment of the substrate, which is crucial for efficient and repeatable laser processing.

The availability of various fillers, such as bronze, carbon fiber, and different types of glass, allows customization to meet specific application needs.

With the continuous advancement of laser processing technology, the role of materials will still be essential to ensure the highest standards of manufacturing accuracy, quality, and repeatability.

Source: OFweek

İlgili öneriler
  • The Ruefeng 30w picosecond laser brings unprecedented possibilities in the art of cutting resin eye lenses

    Ruifeng Picosecond laser: Open the door to the art of cutting resin eye lensesAs an important innovation in the modern eyewear industry, resin lenses bring us visual clarity and comfort with their lightness, transparency and impact resistance.However, with the continuous improvement of people's demand for quality and personalization, how to achieve accurate and beautiful cutting on resin eye lense...

    2023-09-14
    Çeviriyi gör
  • Shanghai Optics and Machinery Institute has made progress in the research of new terahertz sources based on Yb lasers

    Recently, the State Key Laboratory of Intense Field Laser Physics of the Chinese Academy of Sciences Shanghai Institute of Optics and Fine Mechanics has made new progress in generating intense field terahertz waves based on Yb laser pumped organic crystals. The relevant research results were published in Applied Physics Letters under the title "Efficient strong field THz generation from DSTMS crys...

    2024-04-09
    Çeviriyi gör
  • BWT's 3000W product speed surges by 200%

    In the era of speed and precision, the field of thin and medium plate processing is experiencing a revolutionary transformation. Today, let's explore a remarkably fast tool -- BWT’s Lightning 3000W@34μm fiber laser, and witness its impressive performance.On busy production lines, this product is completing complex cutting tasks at astonishing speeds. Its high-speed, high-efficiency, and high-quali...

    05-12
    Çeviriyi gör
  • High sensitivity visualization of ultrafast carrier diffusion using a wide field holographic microscope

    A sketch of the imaging and holographic parts of a transient holographic microscope, including a pulse sequence, to illustrate the signal modulation method. By imaging the pinhole array at the sample position, a diffraction limited excitation spot array can be created, allowing for the simultaneous collection of transient data around 100 excitation spots.Femtosecond transient microscopy is an impo...

    2023-12-25
    Çeviriyi gör
  • TRUMPF will launch a fully automatic laser drilling machine for interconnected manufacturing equipped with a 6-kilowatt fiber laser

    TRUMPF introduced its TruMatic 5000 manufacturing unit and new SheetMaster automatic loading and unloading device technology at the 2023 Blechexpo Metal Plate Processing Exhibition in Stuttgart, Germany.Users of the new system will benefit from fully automatic laser cutting, punching, and forming capabilities. The new SheetMaster device can achieve fully automated material flow within the manufact...

    2023-10-23
    Çeviriyi gör