Türkçe

DIT and SK Hynix sign KRW 20.52 billion agreement

621
2025-01-20 17:54:48
Çeviriyi gör

Recently, DIT, a well-known semiconductor and display equipment manufacturer in South Korea, announced that the company has signed an agreement worth 20.52 billion Korean won to supply wafer processing equipment to SK Hynix. According to DIT, the equipment supplied to SK Hynix this time is mainly a laser annealing kit.

 



DIT was founded in 2005 and was listed on KOSDAQ in 2018. Its main focus is on AI solutions, AOI solutions, laser solutions, and infrared fields.

In 2018, DIT became SK Hynix's first partner. In fact, as early as 2019, DIT collaborated with SK Hynix to develop laser annealing technology. As a result, EO Technics, a well-known laser company in South Korea, has filed a patent infringement lawsuit against DIT, claiming that the technology developed by DIT and SK Hynix infringes on its patented technology. However, as of now, there is no conclusion on this patent dispute case.

After four years of development, DIT signed a contract with SK Hynix in 2023 and began supplying a small amount of laser annealing equipment to SK Hynix in the second half of 2023 for the front-end process of HBM.

By laser annealing the wafer, surface defects are improved and the yield of the production line is increased. Injecting ion dopants into wafers to make them conductive can sometimes result in the inability to synthesize dopants and silicon.

Use laser to irradiate the area where this situation occurs to correct the problem. Laser annealing is less prone to faults like rapid thermal annealing, which can cause wafer bending. Due to the potential application of hybrid bonding in future HBM, it is expected that the demand for laser annealing kits will increase.

In recent years, the proportion of DIT's laser equipment in its revenue has been increasing. In 2022, this business accounted for 5.88% of its total revenue, but the following year this proportion rose to 15.06%, and in the third quarter of 2024 alone, it accounted for 59.46%. It is reported that DIT's revenue for the third quarter of 2024 was 16.5 billion Korean won, with an operating profit of 3.2 billion Korean won.

Source: OFweek

İlgili öneriler
  • The Influence of Laser Beam Intensity Distribution on Lock Hole Geometry and Process Stability under Green Laser Radiation

    Researchers from the University of Aveiro in Portugal and the School of Engineering at Porto Institute of Technology (ISEP) in Portugal reported a study on the influence of laser beam intensity distribution on the geometric shape and process stability of lock holes under green laser radiation. The relevant paper titled "Influence of Laser Beam Intensity Distribution on Keyhole Geometry and Process...

    03-26
    Çeviriyi gör
  • Petrobras will use laser beams to measure wind speed and direction

    Petrobras announced last week that it plans to use laser beams to measure wind speed and direction. The idea is that these data will be used to improve the operation of the wind turbines maintained by this state-owned company in North Rio Grande do.The total investment of the 2.0 version of this device reaches R $11.3 million, known as the offshore wind assessment remote buoy.This technology can a...

    2023-10-24
    Çeviriyi gör
  • Continuation of the Term of President and CEO of Jena Germany

    Recently, the supervisory board of Jenoptik, a leading German laser technology company, announced an important decision: to extend and confirm the term of Dr. Stefan Traeger as Chairman of the Executive Board, with a new term of three years starting from July 1, 2025, and the contract validity period correspondingly extended to June 30, 2028. Dr. Stefan Traeger has been serving as the President ...

    2024-09-06
    Çeviriyi gör
  • Researchers from Columbia University in New York reported the latest research on reverse laser sintering of metal powders

    Researchers from Columbia University in New York reported the latest research on reverse laser sintering of metal powders. The related achievements were published in Scientific Reports under the title "Invested laser sintering of metal powder".The researchers demonstrated the ability of reverse laser sintering technology to manufacture metal powder parts. Researchers first deposit a layer of coppe...

    2024-01-29
    Çeviriyi gör
  • Two Enterprises Collaborate to Overcome Optical Pollution in Vacuum Laser Welding

    Cambridge Vacuum Engineering (CVE), a precision welding equipment company in the UK, and Cranfield University recently announced that they have successfully reached a Knowledge Transfer Partnership (KTP), which will provide global engineers with more welding options.In this cooperation, both parties jointly solved the optical pollution problem in vacuum laser welding, paving the way for the compre...

    2024-02-03
    Çeviriyi gör