Türkçe

Progress made by the Precision Measurement Institute in Thorium Ion Trapping Research

405
2024-06-21 14:25:12
Çeviriyi gör

Recently, the Cold Molecular Ion Research Group of the Institute of Precision Measurement has made significant progress in the loading, trapping, and recognition of thorium ions. The related research results have been published as cover and selected articles in the international physics journal Journal of Applied Physics, titled "Loading and identifying variable charged thorium ions in a linear ion trap with a time of flight mass spectrometer".

In recent years, the measurement of the first excited state energy of thorium-229 atomic nuclei has become a frontier and hotspot in precision measurement physics research. The energy of the first excited state of thorium-229 atomic nucleus is only about 8.3 eV higher than that of the ground state, and the corresponding radiation transition line width is about 10-4? Hz。 At present, thorium-229 is the only nuclide confirmed to be capable of using laser to regulate nuclear energy levels and achieve nuclear clocks.

The research team successfully trapped and accumulated thorium ions in an ion trap using a dynamic loading combined with buffer gas collision cooling method [2]. Meanwhile, the self-developed ion trap time-of-flight mass spectrometry combined system was used to analyze the quantity, velocity distribution, and trapping lifetime of thorium ions. The relevant achievements have laid the technical foundation for further exciting thorium-229 nuclear transitions through electron bridge processes [3].

PhD students Li Lin and Li Zi from the Institute of Precision Measurement are the co first authors of this article, Associate Researcher Hua Xia is the co author, and Researcher Tong Xin is the corresponding author.

This work has been supported by the National Natural Science Foundation of China and the National Key Research and Development Program.

[1] Zi Li,Lin Li,Xia Hua,and Xin Tong,Loading and identifying various charged thorium ions in a linear ion trap with a time-of-flight mass spectrometer,J. Appl. Phys. 135,144402 (2024).

[2] Lin Li,Zi Li,Xia Hua,and Xin Tong,Dynamic laser ablation loading of a linear Paul trap,arXiv:2402.17981,J. Phys. D accepted (2024).

[3] Lin Li,Zi Li,Chen Wang,Wen-Ting Gan,Xia Hua,and Xin Tong,Scheme for the excitation of thorium-229 nuclei based on electronic bridge excitation,Nucl. Sci. Tech. 34,24 (2023).

Cover and Selected Articles of the International Journal of Applied Physics

Source: Institute of Precision Measurement Science and Technology Innovation, Chinese Academy of Sciences

İlgili öneriler
  • Mechanism of Time Power Modulation Increasing Weld Depth in High Power Laser Welding

    Researchers from the Hanover Laser Center and Leibniz University in Germany reported on the mechanism of increased welding depth during time power modulation in high-power laser beam welding. The related paper titled "Mechanisms of Increasing Welding Depth during Temporary Power Modulation in High Power Laser Beam Welding" was published in Advanced Engineering Materials.Understanding the basic mec...

    2024-12-18
    Çeviriyi gör
  • Swedish KTH develops 3D printed quartz glass micro optical devices on optical fibers

    In what has been described as the "first communication", Swedish researchers conducted 3D printed quartz glass micro optical devices on the tip of optical fibers. They said that this progress could lead to faster Internet and better connectivity, as well as innovations such as smaller sensors and imaging systems.Scientists from the KTH Royal Institute of Technology in Stockholm have stated that co...

    2024-05-23
    Çeviriyi gör
  • Outlook - Future of miniaturized lasers

    The disruptive miniaturization design of fiber lasers is feeding back into the handheld laser welding market. The handheld laser welding that enters the trunk is bathed in the luster of black technology, making traditional argon arc welding and electric welding tremble.In the early years, argon arc welding was the most commonly used thin plate welding method among our ancestors, but its drawbacks ...

    2023-12-19
    Çeviriyi gör
  • Ruifeng constant green laser: With dense and concentrated characteristics, it can accurately cut on PCBs and FPCs

    In the vigorous development of contemporary technology, green laser has become a shining star in the field of electronics. Not only because of its excellent performance, but also because it brings infinite imagination and creative inspiration to creators. The use of green laser for PCB (Printed Circuit Board) and FPC (Flexible Printed Circuit Board) shape cutting has opened up a new artistic journ...

    2023-09-19
    Çeviriyi gör
  • A review of research on residual stresses in carbon steel welding

    Researchers from the University of Witwatersrand in South Africa have reported a review of research on residual stresses in carbon steel welding: formation mechanisms, mitigation strategies, and advances in advanced post weld heat treatment technologies. The relevant paper titled "A comprehensive review of residual stresses in carbon steel welding: formation mechanisms, mitigation strategies, and ...

    04-12
    Çeviriyi gör