Türkçe

Dutch satellite instruments have achieved milestone achievements in transmitting laser data to Earth

361
2024-01-25 10:45:47
Çeviriyi gör

TNO wrote that this is the first time Dutch technology has been used to send data from a satellite to a ground station press release on Earth. This technology uses invisible laser signals to achieve faster and safer data flow compared to ubiquitous communication radio frequencies.

Kees Buijsrogge, Director of TNO Space, said, "This critical milestone marks a significant achievement for the Netherlands and Europe in advancing technological sovereignty within a strong NATO, as it will achieve faster and safer broadband connectivity. This is a temporary result of the emerging Dutch industry's collaborative efforts dedicated to optical satellite communication.".

Almost all connections in daily life, such as Wi Fi, Bluetooth, or 5G, are based on radio frequency waves. Due to the increase in data consumption, this radio spectrum is slowly filling up, causing scarcity and interference. Laser satellite communication provides a solution as it can send data faster and safer through invisible laser signals. The radio frequency can reach speeds of several hundred megabits, and in some cases can reach several thousand megabits per second.

The speed of laser communication has increased by 100 to 1000 times. Even at lower speeds, laser communication links are interesting because the system is smaller, lighter, and more energy-efficient, which is crucial for space applications. It is also safer because it uses a very narrow optical laser beam instead of a wide radio signal. This makes eavesdropping more difficult and interference can be quickly detected.

The laser communication system SmallCAT was launched by SpaceX on a satellite operated by the Norwegian Space Agency in April 2023. Since then, TNO has been preparing to establish a connection between satellites flying in low Earth orbit and optical ground stations in The Hague and Tenerife Island. In such an experiment, the ground station first sends a signal to the satellite, and the laser communication system on the satellite must find the signal through its overpass. Then, it sends the laser back to the Earth that the ground station needs to capture. This is very challenging as the satellite flies at a speed of 28000 kilometers per hour at an altitude of 500 kilometers.

In several experiments, TNO successfully found two ground stations from space and sent back and recaptured the laser beam with extremely high accuracy. Once the link is established, data is transmitted from satellite instruments and received by the optical ground station in The Hague at a maximum data rate of 1 gigabit per second. The ground station of TNO in The Hague was jointly developed by TNO and Airbus Netherlands. This is the first time such a compact satellite instrument made in the Netherlands has achieved this. It indicates that the terminals on the satellite and the ground station are working, and they can also be found under real conditions.

Source: Laser Net

İlgili öneriler
  • Surface coupled laser technology manufacturer, secured £ 2.94 million in financing

    Recently, renowned surface coupled laser technology supplier Vector Photonics announced that it has received £ 1.667 million in equity investment and £ 1.27 million in additional research funding for the continued commercialization of its unique surface coupled laser (SCL) technology. Surface coupled lasers have completely changed semiconductor laser manufacturing, improving the performance of var...

    2024-06-14
    Çeviriyi gör
  • Scientists demonstrate a new optical neural network training method that can crush electronic microprocessors

    The current deep neural network system (such as ChatGPT) can quickly improve energy efficiency by 100 times in training, and "future improvements will greatly increase by several orders of magnitude. Scientists from MIT and other institutions have demonstrated a new optical neural network training method that can crush state-of-the-art electronic microprocessors.Moreover, the computational density...

    2023-09-27
    Çeviriyi gör
  • Laser cladding method improves the surface performance of parts

    Laser cladding, also known as laser metal deposition, is a process of depositing one material onto another.When the laser beam scans the target surface, metal powder or wire flow is fed into the molten pool formed by the laser beam, thereby producing the required material coating.The laser cladding method improves the surface properties of the parts, such as wear resistance, and allows for the rep...

    2023-12-28
    Çeviriyi gör
  • The construction of Hefei Advanced Light Source Project held a launch ceremony, expected to be completed and released in 5 years

    Recently, in the Future Science City of Hefei City, Anhui Province, the National Major Science and Technology Infrastructure Project and Supporting Projects of Hefei Advanced Light Source announced the start of construction, with a planned land area of approximately 656 acres. The first phase of the project is expected to be completed by September 2028.After completion, it will become an internati...

    2023-09-23
    Çeviriyi gör
  • Cambridge University researchers use lasers to "heat and strike" 3D printed steel

    According to the University of Cambridge, researchers have developed a new method for 3D printing metal, which can help reduce costs and more effectively utilize resources. This method, developed by a research team led by the University of Cambridge, allows structural modifications to be "programmed" into metal alloys during 3D printing - fine-tuning their performance without the need for thousand...

    2023-11-03
    Çeviriyi gör