chanelink logo
CHANELINK
Türkçe

SEMA 2023: Huali's Easy Level Floating Free Laser Fuel Level Transmitter

855
2023-11-03 14:51:33
Çeviriyi gör

Winning the SEMA Best Engineering New Product Award is not an easy task. Therefore, it said a lot about Huali's new non floating fuel transmitter bringing hardware home. The Easy Level fuel level sender is a brand new design that does not rely on traditional float arm settings, but uses a frikken laser beam to measure the fuel level in the tank.

More precisely, Easy Level uses LiDAR technology to measure the distance between the fuel surface and the sensor unit, and then converts this distance measurement value into a signal that can be read by the fuel level gauge. It can be used with any aftermarket instrument, "said Steve Sparkman of Holley. It is not suitable for OEM instruments, but all aftermarket instruments - Classic Instruments, Dakota Digital, etc. - can be easily connected.

This sensor is suitable for tanks with depths ranging from 4 inches to 39 inches and can be set up outside the vehicle. By using the buttons on the device, you can set the empty and full positions before installation, and then set the same position on the instrument panel after installation. You can even adjust the damping rate of the reading through the DIP switch on the device to manage instrument bounce caused by fuel shaking.

This device is very compact and easy to install. It looks like a hockey ball, "Sparkman said. It has a laser that can shoot down and tell you where the fuel is. It's so simple. Installation is a simple task, including installing hardware and gaskets, as well as installing flange templates. The small bolt circle diameter of 2-1/8 inches hardly occupies space on the fuel tank, and the 12 volt PWM output signal makes sensor wiring easy.

Source: Laser Network

İlgili öneriler

  • The efficiency of crystalline silicon solar cells has exceeded 27% for the first time, and Longi's research results have been published in Nature

    Recently, Longi Green Energy Technology Co., Ltd. (hereinafter referred to as "Longi"), as the first unit, published a research paper titled "Silicon heterojunction back contact solar cells by laser patterning" online in the journal Nature, reporting for the first time the research results of breaking through 27% of the photoelectric conversion efficiency of crystalline silicon cells through full ...

    2024-10-18
    Çeviriyi gör

  • Korean laser company AP Systems establishes new AVP equipment division

    Recently, AP Systems, a well-known laser manufacturer in South Korea, established a new AVP equipment division for the advanced packaging field. This business unit will focus on laser equipment required for advanced packaging processes of high bandwidth memory (HBM).AP Systems is a subsidiary of APS Group, mainly focused on the fields of display and semiconductor laser processing equipment. It foc...

    01-15
    Çeviriyi gör

  • The improvement of additive manufacturing through artificial intelligence, machine learning, and deep learning

    Additive manufacturing (AM) has made it possible to manufacture complex personalized items with minimal material waste, leading to significant changes in the manufacturing industry. However, optimizing and improving additive manufacturing processes remains challenging due to the complexity of design, material selection, and process parameters. This review explores the integration of artificial int...

    02-24
    Çeviriyi gör

  • Scientists have successfully miniaturized erbium-based erbium lasers on silicon nitride photonic chips

    Scientists from the Federal Institute of Technology in Lausanne (EPFL) have successfully miniaturized a powerful erbium-based erbium laser on silicon nitride photonic chips. Due to the large volume and difficulty in shrinking of typical erbium-based fiber lasers, this breakthrough is expected to make significant progress in optical communication and sensing technology.Since the 1960s, lasers have ...

    2024-06-13
    Çeviriyi gör

  • How to choose between continuous and pulsed fiber lasers?

    Fiber laser, with its simple structure, low cost, high electro-optical conversion efficiency, and good output effect, has been increasing in proportion in industrial lasers year by year. According to statistics, fiber lasers accounted for 52.7% of the industrial laser market in 2020.According to the characteristics of the output beam, fiber lasers can be classified into two categories: continuous ...

    2023-12-20
    Çeviriyi gör