chanelink logo
CHANELINK
Türkçe

Germany and the United States jointly build a $150 million laser equipment laboratory for studying inertial fusion energy and high energy density physics

867
2023-08-10 18:21:03
Çeviriyi gör
German laser Fusion developer Marvel Fusion said it will partner with Colorado State University (CSU) on a new $150 million laser equipment lab to study inertial fusion energy and high energy density physics.

"It will be home to one of the most powerful laser facilities in the world and an international center for laser fusion energy and high energy density physics research," the company said in a statement announcing the agreement.
A public-private partnership supported by the U.S. Department of Energy's LaserNetUS program will establish a "next-generation high-power laser and fusion research facility" at the Foothills campus of Colorado State University.

Ultrafast method

As one of the few new venture-backed private companies targeting commercial laser-driven Fusion energy, Marvel Fusion says the state-of-the-art facility will serve as a platform to advance its unique approach to this enormous challenge.

The startup has strong ties to the Extreme Light Infrastructure (ELI) project in Eastern Europe, and its chief technology officer Georg Korn was formerly the ELI's technical director.

Korn co-founded the company in 2019 with CEO Moritz von der Linden, Karl-Georg Schlesinger and Pasha Shabalin. Previously, the company has raised €60 million in funding and partnered with defense giant Thales to upgrade Romania's 10 gigawatt Extreme Optics - Nuclear Physics Project (ELI-NP) facility and set up a U.S. subsidiary.

The company plans to use ultrafast lasers and "nanostructured" fuels to enhance the fusion of protons and boron-11 isotopes.

"This public-private partnership sets the global standard for laser fusion research and advances the development of safe, clean and reliable energy." This is an incredible step forward for Marvel Fusion and a testament to our success and vision."

"Over the past two years, I have worked with the world-class team at Colorado State University to achieve immeasurable results. We are grateful to Colorado State University, the state of Colorado, and the U.S. Department of Energy for their trust and support of the LaserNetUS project."
 

LaserNetUS covers the most powerful lasers in the United States and Canada

10Hz Repetition rate

The new lab, scheduled for completion in 2026, is expected to have at least three laser systems, each with a peak power of multiple pewatts and a repetition rate of 10 Hertz. "Such a combination of lasers will make the facility unique in the world, and it will be designed to accommodate future extensions and additional lasers," the company said.

Marvel Fusion is working on a proton-boron fusion method. The company has developed a short-pulse laser technology with direct diode pumping. The company's approach utilizes a peak power laser output of more than 10 PW and relies on its diode technology to ensure that its lasers can deliver pulse repetition rates of up to 10 Hz.

"Csu is at the forefront of laser research, and this new partnership will solidify CSU's position as an international leader in laser science, a field that has the potential to bring profound benefits to our planet for generations to come," said CSU President Amy Parsons.

The LaserNetUS project, funded by the U.S. Department of Energy's Office of Fusion Energy Sciences, recently announced $28.5 million in new funding support for high-power laser laboratories in the United States and Canada.

The U.S. Department of Energy has awarded CSU $12.5 million for laser upgrade prototypes that will help create and maintain the quality and expertise of equipment that makes projects like the new lab facility possible.

Marvel Fusion said that through the collaboration, Colorado State University's ability to conduct high-power laser research and its applications will be greatly expanded, with opportunities in semiconductor chip production, materials science, high energy density science and high energy physics, of which fusion is just one application.

It is expected to inspire and facilitate further collaboration with industry, other universities and US national laboratories.

Prototype development

"This is an exciting opportunity for laser-based science, an ideal facility for discovery and advanced technology development with enormous potential for societal impact," Jorge Rocca, director of the Advanced Laser and Extreme Photonics Laboratory at Colorado State University, said in the release.

In addition to the CSU project, Marvel Fusion says it is planning to build a prototype as the next step toward a commercial fusion power plant.

"The prototype will house hundreds of laser systems capable of fusion ignition and demonstrate the technology at scale," the company said. The company will conduct the work through its Colorado subsidiary.

Source: Yangtze River Delta Laser Alliance

İlgili öneriler

  • Scientists have successfully miniaturized erbium-based erbium lasers on silicon nitride photonic chips

    Scientists from the Federal Institute of Technology in Lausanne (EPFL) have successfully miniaturized a powerful erbium-based erbium laser on silicon nitride photonic chips. Due to the large volume and difficulty in shrinking of typical erbium-based fiber lasers, this breakthrough is expected to make significant progress in optical communication and sensing technology.Since the 1960s, lasers have ...

    2024-06-13
    Çeviriyi gör

  • Laser blasting promises to solve global plastic problem

    Recently, researchers announced the development of a way to use laser blasting to break down plastic and other material molecules into their smallest parts for future reuse.This method involves placing these materials on a two-dimensional material called transition metal dichalcogenides and then irradiating them with light.This discovery has the potential to improve the way we handle plastics that...

    2024-07-16
    Çeviriyi gör

  • Natural Communication: Oxide Dispersion Enhancement for High Performance 3D Printing of Pure Copper

    The laser additive manufacturing technology of pure copper (Cu) with complex geometric shapes has opened up vast opportunities for the development of microelectronic and telecommunications functional devices. However, laser forming of high-density pure copper remains a challenge.Recently, the forefront of additive manufacturing technology has noticed a joint report by the University of Hong Kong, ...

    04-11
    Çeviriyi gör

  • The world's first tunable wavelength blue semiconductor laser

    Recently, researchers from Osaka University in Japan have developed the world's first compact, wavelength tunable blue semiconductor laser in a new study. This breakthrough paves the way for far ultraviolet light technology and brings enormous potential for applications such as virus inactivation and bacterial disinfection. The research results have been published in the journal Applied Physics Le...

    2024-11-23
    Çeviriyi gör

  • The femtosecond laser was used to manufacture a magnetically responsive "Janus Origami" robot, which realized the effective integration of various droplet manipulation functions

    Recently, the reporter learned from the University of Science and Technology of China that Professor Hu Yanlei's team and his collaborators in the micro-nano Engineering Laboratory of the School of Engineering Science and Technology of the School have prepared a magnetic-responsive double-God origami robot that can be used for cross-scale droplet manipulation using femtosecond laser micro-nano man...

    2023-09-12
    Çeviriyi gör