chanelink logo
CHANELINK
Türkçe

Scientists use glass to create femtosecond lasers

675
2023-09-28 17:12:33
Çeviriyi gör

Image source: Federal Institute of Technology in Lausanne, Switzerland

 

Science and Technology Daily, Beijing, September 27th (Reporter Zhang Jiaxin) Commercial femtosecond lasers are manufactured by placing optical components and their mounting bases on a substrate, which requires strict alignment of optical components. So, is it possible to manufacture femtosecond lasers entirely from glass? According to the latest issue of Optics magazine, scientists at the Federal Institute of Technology in Lausanne, Switzerland have successfully achieved this, with lasers no larger than credit cards and easier to align.

Researchers stated that due to the lower thermal expansion of glass compared to traditional substrates, it is a stable material. Therefore, they chose glass as the substrate and used commercial femtosecond lasers to etch special grooves on the glass to accurately place the basic components of the laser. Even in precision manufacturing at the micron level, the grooves and components themselves are not precise enough to achieve laser quality alignment. In other words, the reflector is not fully aligned, so at this stage, their glass device cannot be used as a laser.

So, researchers further designed etching to position a mirror in a groove with micro mechanical bending, which can locally twist the mirror when irradiated by femtosecond laser. By aligning the mirror in this way, they ultimately created a stable, small-scale femtosecond laser.

Despite its small size, the peak power of the laser is about 1 kilowatt, and the time to emit pulses is less than 200 femtoseconds, which is so short that light cannot pass through human hair.

This method of permanently aligning free space optical components through laser material interaction can be extended to various optical circuits, with extreme alignment resolutions as low as sub nanometer level.

 

Reprinted from：LDWORLD

İlgili öneriler

  • Osram has received over 300 million euros in German investment to develop next-generation optoelectronic semiconductor technology

    Recently, ams Osram, a developer of smart sensors and transmitters, announced that it expects to receive over 300 million euros in funding from the German Federal Government and the Free State of Bavaria over the next five years.This funding is aimed at promoting Osram's development of the next generation optoelectronic semiconductor technology in Regensburg, Germany. The IPCEI funding in this bat...

    2023-09-25
    Çeviriyi gör

  • JMP： Small hole mode swing laser welding of nickel based high-temperature alloys - simulation, experiment, and process diagram

    IntroductionThe small hole mode swing laser welding has gained increasing recognition due to its ability to bridge gaps, refine microstructures, and enhance the mechanical properties of welds. However, the effects of amplitude, frequency, welding speed, laser beam power, and beam radius on heat flux distribution, melting mode, and three-dimensional temperature field have not been well understood. ...

    04-11
    Çeviriyi gör

  • UK venture capital group acquires MicroLED developer Plessey

    Haylo Labs, a UK company recently established by former WaveOptics CEO David Hayes, has acquired microLED developer Plessey Semiconductors.Haylo says it also plans to invest more than £100 million scaling Plessey’s production capacity over the next five years at the firm’s GaN-on-silicon site in Plymouth and beyond, in anticipation of fast-growing demand for augmented and virtual reality (AR/VR) a...

    09-01
    Çeviriyi gör

  • Successful First Satellite Earth Laser High Speed Image Transmission Experiment

    Recently, the reporter learned from Changguang Satellite Technology Co., Ltd. (hereinafter referred to as "Changguang Satellite") that the company used a self-developed vehicle mounted laser communication ground station to conduct satellite ground laser high-speed image transmission experiments with the onboard laser communication terminal of the "Jilin No.1" constellation MF02A04 satellite and ac...

    2023-10-14
    Çeviriyi gör

  • September 2024 China International Industry Fair Machine Tool Exhibition

    The CNC Machine Tool and Metal Processing Exhibition under the China International Industry Fair gathers global intelligent machine tool equipment and focuses on cutting-edge metal processing technology. The exhibition categories cover metal cutting, metal forming, laser processing, sheet metal stamping, machine tool supporting functional components and peripheral products, with a display area of ...

    2024-09-04
    Çeviriyi gör